Hi @peter ,
As long as, your router can route traffic between Vlans then you can set up the RV50 as below:
I am attaching the diagram for example. I have a PC in Vlan 2 and RV50 in Vlan1
PC: 192.168.86.129
RV50: 192.168.68.38
1. Set port mode to WAN
- Set IP 68.38 to RV’s WAN ethernet. Verify WAN ethernet is ready
3. Enable Remote Access
Now I can access RV50 (vlan1) from PC(vlan2).
Please share if you have any concerns. Help us tick Solution if it is useful. It might be beneficial to someone getting the same question