How to setup static routing so I can ping on another subnet?

[Vianney]

HI @jmorris ,
Please try to take a look at the topic. It can help. Tell me if you have any concerns
Thanks

RV50 admin not accessible via different vlan

Hi @peter , As long as, your router can route traffic between Vlans then you can set up the RV50 as below: [image] I am attaching the diagram for example. I have a PC in Vlan 2 and RV50 in Vlan1 PC: 192.168.86.129 RV50: 192.168.68.38 1. Set port mode to WAN [image] Set IP 68.38 to RV’s WAN ethernet. Verify WAN ethernet is ready [image] [image] 3. Enable Remote Access [image] Now I can access RV50 (vlan1) from PC(vlan2). Please share if you have any concerns. Help us tick Solu…