Hi, i am using Q24 series ,it is working fine in India with both wavecom EVM and the PCB design by me. but when i am trying the same in US (new jersey) (I have selected US frequency band ) the Modem connects to the network in wavecom EVM but does not connect when the same module when connected to …

How is your signal strength? Does your pcb include antenna conections and/or the antenna itself? Maybe the antenna is not suited for the US frequencies?

Check your power supplies! After start-up, registering to the network is the first thing that actually requires the module to transmit. If your power supplies are not quite right, everything can seem fine up to that point - but the real test is whether the supplies are man enough for transmitting. …

I am using quad band external antenna .with this antenna when connected to the wavecom EVM the signal strength is 30. the same external antenna i have connected to the MY PCB and this antenna works fine with wavecom pug and play modem in US.

Tha sim card what you using is india simcard ? Wavecom module has quard band 900/800/1900 mhz probably 1900mhz suits in america, plz try by changing to this frequency

Regarding registering to the network

Legacy General

sjoshidce November 6, 2008, 3:03am 5

The power supply i am using 1s 3.8V/3A and the same PCB board is working fine when used in india.

Lots of missing topics!

Topic		Replies	Views
Not registering on GSM? Legacy AirPrime modules	5	1731	May 28, 2008
Wavecom GSM-Q2403 no GSM connection Legacy AirPrime modules	6	5346	November 24, 2017
Registering to BTS Open AT	14	3183	September 12, 2006
Q2686 Evaluation Kit - Network reg. problem Open AT	6	1165	October 27, 2006
Q2686RD running properly in Europe, not in Canada Legacy AirPrime modules	7	1911	July 21, 2014

Regarding registering to the network

Related topics