How to Configure FX30 to work with a sim card

[jyijyi]

You can see here to share cellular data to ethernet client

https://forum.mangoh.io/t/setting-up-mangoh-red-as-router-to-cellular-gateway/1241

For sharing cellular data to USB ECM interface, you can see here:

Using fx30, internet router

You can share the data connection with USB ECM interface: Fx30 side: echo > /etc/resolv.conf cm data connect & iptables --flush iptables -t nat -A POSTROUTING --out-interface rmnet0 -j MASQUERADE iptables -A FORWARD -o usb0 -i rmnet0 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i usb0 -o rmnet0 -j ACCEPT echo 1 > /proc/sys/net/ipv4/ip_forward cat /etc/resolv.conf nameserver 10.144.148.1 nameserver 10.145.148.5 PC side: sudo route add default gw 192.168.2.2 us…

(as your FX30 is using WP76 module, you need to change the “usb0” to “ecm0” and “rmnet0” to “rmnet0_data0” inside those commands)