logread Part 1:
Mar 5 01:07:43 fx30s syslog.info syslogd started: BusyBox v1.22.1
Mar 5 01:07:43 fx30s user.notice kernel: klogd started: BusyBox v1.22.1 (2017-04-19 15:18:28 PDT)
Mar 5 01:07:43 fx30s user.warn kernel: [ 0.000000] Kernel is starting...
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] Initializing cgroup subsys cpuset
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] Initializing cgroup subsys cpu
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] Initializing cgroup subsys cpuacct
Mar 5 01:07:43 fx30s user.notice kernel: [ 0.000000] Linux version 3.14.29ltsi-a00e464379_c5f87a778d (jenkins@CAKEL-EV-ALBLD2) (gcc version 4.9.1 (GCC) ) #2 PREEMPT Wed Apr 19 15:36:04 PDT 2017
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] Machine model: QCT MSM9615 CDP
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] memory pool 3 (start 4ff00000 size 100000) initialized
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] Memory policy: Data cache writeback
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] L310 cache controller enabled
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00540000, Cache size: 262144 B
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] socinfo_init: v7, id=106, ver=3.0, raw_id=1760, raw_ver=1760, hw_plat=0, hw_plat_ver=65536
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] accessory_chip=0, hw_plat_subtype=0, pmic_model=19, pmic_die_revision=3
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.000000] On node 0 totalpages: 41216
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0aabf44, node_mem_map cf507000
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.000000] Normal zone: 496 pages used for memmap
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.000000] Normal zone: 41216 pages, LIFO batch:7
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] CPU: All CPU(s) started in SVC mode.
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Mar 5 01:07:43 fx30s user.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 40720
Mar 5 01:07:43 fx30s user.notice kernel: [ 0.000000] Kernel command line: console=ttyHSL0,115200 console=ttyHSL1,115200 fudge_ro_rootfs=true rootfs_ro=true mtdparts=msm_nand:0x00100000@0x051c0000(bootloader),0x01400000(kernel),0x03140000(rootfs),0x02780000(user0),
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] allocated 507904 bytes of page_cgroup
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Mar 5 01:07:43 fx30s user.warn kernel: [ 0.000000] Memory: 150468K/164864K available (6762K kernel code, 632K rwdata, 2260K rodata, 1365K init, 1268K bss, 14396K reserved, 0K highmem)
Mar 5 01:07:43 fx30s user.notice kernel: [ 0.000000] Virtual kernel memory layout:
Mar 5 01:07:43 fx30s user.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Mar 5 01:07:43 fx30s user.notice kernel: [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
Mar 5 01:07:43 fx30s user.notice kernel: [ 0.000000] vmalloc : 0xd0000000 - 0xff000000 ( 752 MB)
Mar 5 01:07:43 fx30s user.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xcf800000 ( 248 MB)
Mar 5 01:07:43 fx30s user.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Mar 5 01:07:43 fx30s user.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Mar 5 01:07:43 fx30s user.notice kernel: [ 0.000000] .text : 0xc0008000 - 0xc08d7d58 (9024 kB)
Mar 5 01:07:43 fx30s user.notice kernel: [ 0.000000] .init : 0xc08d8000 - 0xc0a2d7bc (1366 kB)
Mar 5 01:07:43 fx30s user.notice kernel: [ 0.000000] .data : 0xc0a2e000 - 0xc0acc39c ( 633 kB)
Mar 5 01:07:43 fx30s user.notice kernel: [ 0.000000] .bss : 0xc0acc39c - 0xc0c094fc (1269 kB)
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] Preemptible hierarchical RCU implementation.
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000000] NR_IRQS:681
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 65542000541696ns
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000518] Console: colour dummy device 80x30
Mar 5 01:07:43 fx30s user.info kernel: [ 0.000610] Calibrating delay loop... 366.18 BogoMIPS (lpj=1830912)
Mar 5 01:07:43 fx30s user.info kernel: [ 0.060094] pid_max: default: 32768 minimum: 301
Mar 5 01:07:43 fx30s user.info kernel: [ 0.060552] Security Framework initialized
Mar 5 01:07:43 fx30s user.info kernel: [ 0.060643] Smack: Initializing.
Mar 5 01:07:43 fx30s user.info kernel: [ 0.061071] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mar 5 01:07:43 fx30s user.info kernel: [ 0.061071] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mar 5 01:07:43 fx30s user.info kernel: [ 0.062810] Initializing cgroup subsys debug
Mar 5 01:07:43 fx30s user.info kernel: [ 0.062841] Initializing cgroup subsys memory
Mar 5 01:07:43 fx30s user.info kernel: [ 0.062902] Initializing cgroup subsys devices
Mar 5 01:07:43 fx30s user.info kernel: [ 0.062933] Initializing cgroup subsys freezer
Mar 5 01:07:43 fx30s user.info kernel: [ 0.062963] Initializing cgroup subsys net_cls
Mar 5 01:07:43 fx30s user.info kernel: [ 0.062963] Initializing cgroup subsys blkio
Mar 5 01:07:43 fx30s user.info kernel: [ 0.063055] CPU: Testing write buffer coherency: ok
Mar 5 01:07:43 fx30s user.info kernel: [ 0.063146] ftrace: allocating 22858 entries in 68 pages
Mar 5 01:07:43 fx30s user.info kernel: [ 0.144788] Setting up static identity map for 0x40e1e200 - 0x40e1e258
Mar 5 01:07:43 fx30s user.info kernel: [ 0.167831] devtmpfs: initialized
Mar 5 01:07:43 fx30s user.info kernel: [ 0.177262] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
Mar 5 01:07:43 fx30s user.info kernel: [ 0.179887] regulator-dummy: no parameters
Mar 5 01:07:43 fx30s user.info kernel: [ 0.180466] NET: Registered protocol family 16
Mar 5 01:07:43 fx30s user.info kernel: [ 0.181657] DMA: preallocated 256 KiB pool for atomic coherent allocations
Mar 5 01:07:43 fx30s user.err kernel: [ 0.181931] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.182023] gpiochip_add: registered GPIOs 0 to 87 on device: msmgpio
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.182542] ->gpioRI = 1
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.182572] ->gpioDTR = 1
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.182572] ->gpioDCD = 1
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.182603] ->gpioDSR = 1
Mar 5 01:07:43 fx30s user.info kernel: [ 0.182664] gpio_sync_ri: RI owner is Modem
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.182694] ->gpio16 = 0
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.182694] ->gpio17 = 0
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.182694] ->gpio18 = 0
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.182725] ->gpio19 = 0
Mar 5 01:07:43 fx30s user.info kernel: [ 0.183549] msm_serial_hsl_init: driver initialized
Mar 5 01:07:43 fx30s user.info kernel: [ 0.184129] cpuidle: using governor ladder
Mar 5 01:07:43 fx30s user.info kernel: [ 0.184159] cpuidle: using governor menu
Mar 5 01:07:43 fx30s user.info kernel: [ 0.185075] msm_rpm_init: RPM firmware 3.0.16842958
Mar 5 01:07:43 fx30s user.info kernel: [ 0.185380] gpio_cf3_low_power_reset_toggle: Setting up LowPower_RESET pin toggle timer
Mar 5 01:07:43 fx30s user.info kernel: [ 0.284602] gpio_cf3_low_power_reset_timer_callback: LowPower_RESET pin toggled high
Mar 5 01:07:43 fx30s user.info kernel: [ 0.284602] gpio_cf3_low_power_reset_timer_callback: LowPower_RESET pin toggle timer deleted
Mar 5 01:07:43 fx30s user.err kernel: [ 0.394719] unmatched machine ID in register_i2c_devices
Mar 5 01:07:43 fx30s user.info kernel: [ 0.394750] wl18xx board initialization done
Mar 5 01:07:43 fx30s user.info kernel: [ 0.395238] 8018_s1: 500 <--> 1150 mV at 1150 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.395666] 8018_s2: 1225 <--> 1300 mV at 1300 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.396551] 8018_s3: 1800 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.397070] 8018_s4: 2100 <--> 2200 mV at 2200 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.397924] 8018_s5: 1350 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.398809] 8018_l2: 1800 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.399694] 8018_l3: 1800 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.400152] 8018_l4: 3300 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.400518] 8018_l5: 2850 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.400885] 8018_l6: 1800 <--> 2850 mV at 2850 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.401312] 8018_l7: 1850 <--> 1900 mV at 1900 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.401403] 8018_l7: supplied by 8018_s4
Mar 5 01:07:43 fx30s user.info kernel: [ 0.401770] 8018_l8: 1200 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.401861] 8018_l8: supplied by 8018_s3
Mar 5 01:07:43 fx30s user.info kernel: [ 0.402258] 8018_l9: 750 <--> 1150 mV at 1150 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.402350] 8018_l9: supplied by 8018_s5
Mar 5 01:07:43 fx30s user.info kernel: [ 0.402746] 8018_l10: 1050 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.402838] 8018_l10: supplied by 8018_s5
Mar 5 01:07:43 fx30s user.info kernel: [ 0.403204] 8018_l11: 1050 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.403326] 8018_l11: supplied by 8018_s5
Mar 5 01:07:43 fx30s user.info kernel: [ 0.403723] 8018_l12: 1050 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.403845] 8018_l12: supplied by 8018_s5
Mar 5 01:07:43 fx30s user.info kernel: [ 0.404242] 8018_l13: 1850 <--> 2950 mV at 2950 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.404639] 8018_l14: 2850 mV normal idle
Mar 5 01:07:43 fx30s user.info kernel: [ 0.405096] 8018_lvs1: no parameters
Mar 5 01:07:43 fx30s user.info kernel: [ 0.405157] 8018_lvs1: supplied by 8018_s3
Mar 5 01:07:43 fx30s user.info kernel: [ 0.405554] vdd_dig_corner: 0 <--> 0 mV at 0 mV
Mar 5 01:07:43 fx30s user.info kernel: [ 0.412849] ext_2p95v: no parameters
Mar 5 01:07:43 fx30s user.info kernel: [ 0.413001] gpio_vreg_probe: id=18, name=ext_2p95v, gpio=18, gpio_label=ext_2p95_en
Mar 5 01:07:43 fx30s user.info kernel: [ 0.413520] pm8018_probe: PMIC revision 1: F3
Mar 5 01:07:43 fx30s user.info kernel: [ 0.413520] pm8018_probe: PMIC revision 2: 08
Mar 5 01:07:43 fx30s user.info kernel: [ 0.413551] pm8018_probe: PMIC version: PM8018 rev 2.1
Mar 5 01:07:43 fx30s user.info kernel: [ 0.413581] pm8018_probe: PMIC Restart Reason: Triggered from KPD (power key press)
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.415046] gpiochip_add: registered GPIOs 88 to 93 on device: pm-gpio
Mar 5 01:07:43 fx30s user.info kernel: [ 0.415107] pm_gpio_probe: OK: base=88, ngpio=6
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.415626] gpiochip_add: registered GPIOs 94 to 99 on device: pm8xxx-mpp
Mar 5 01:07:43 fx30s user.info kernel: [ 0.415656] pm8xxx_mpp_probe: OK: base=94, ngpio=6
Mar 5 01:07:43 fx30s user.info kernel: [ 0.417732] msm_serial_hsl_probe: ttyHSL0 could be used as generic serial port.
Mar 5 01:07:43 fx30s user.info kernel: [ 0.417762] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
Mar 5 01:07:43 fx30s user.info kernel: [ 0.418068] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16340000 (irq = 184, base_baud = 460800) is a MSM
Mar 5 01:07:43 fx30s user.info kernel: [ 0.419288] msm_serial_hsl_probe: ttyHSL1 could be used as generic serial port.
Mar 5 01:07:43 fx30s user.info kernel: [ 0.419319] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
Mar 5 01:07:43 fx30s user.info kernel: [ 0.419594] msm_serial_hsl.1: ttyHSL1 at MMIO 0x16440000 (irq = 186, base_baud = 460800) is a MSM
Mar 5 01:07:43 fx30s user.info kernel: [ 0.431130] cpufreq_table_init: CPU: 4 scaling frequencies supported.
Mar 5 01:07:43 fx30s user.warn kernel: [ 0.431649] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
Mar 5 01:07:43 fx30s user.warn kernel: [ 0.431680] hw-breakpoint: CPU 0 failed to disable vector catch
Mar 5 01:07:43 fx30s user.err kernel: [ 0.432321] socinfo_init_dev: device_register fail (-22)
Mar 5 01:07:43 fx30s user.info kernel: [ 0.435617] sps:REVISION of BAM 0xd0060000 is 0x5.
Mar 5 01:07:43 fx30s user.info kernel: [ 0.435678] sps:BAM 0x12244000 is registered.
Mar 5 01:07:43 fx30s user.info kernel: [ 0.436105] sps:sps is ready.<6>[ 0.473584] bio: create slab <bio-0> at 0
Mar 5 01:07:43 fx30s user.err kernel: [ 0.474774] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:187
Mar 5 01:07:43 fx30s user.err kernel: [ 0.474835] qup_i2c qup_i2c.0: I2C slave addr:0x20 not connected
Mar 5 01:07:43 fx30s user.err kernel: [ 0.474866] pca953x 0-0020: failed reading register
Mar 5 01:07:43 fx30s user.warn kernel: [ 0.474927] pca953x: probe of 0-0020 failed with error -107
Mar 5 01:07:43 fx30s user.warn kernel: [ 0.476789] pca953x 0-0022: interrupt support not compiled in
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.477124] gpiochip_add: registered GPIOs 200 to 223 on device: tca6424
Mar 5 01:07:43 fx30s user.info kernel: [ 0.478284] ION heap vmalloc created
Mar 5 01:07:43 fx30s user.info kernel: [ 0.478315] ION heap iommu created
Mar 5 01:07:43 fx30s user.info kernel: [ 0.478345] ION heap audio created at 4ff01000 with size af000
Mar 5 01:07:43 fx30s user.notice kernel: [ 0.479047] pm8xxx_pwm_probe: OK
Mar 5 01:07:43 fx30s user.info kernel: [ 0.479169] swimcu_i2c_init: start
Mar 5 01:07:43 fx30s user.info kernel: [ 0.479261] swimcu_i2c_probe: start 1
Mar 5 01:07:43 fx30s user.info kernel: [ 0.479261] swimcu_device_init: start 0x0
Mar 5 01:07:43 fx30s user.info kernel: [ 0.479291] register_sierra_gpio_wake_notifier
Mar 5 01:07:43 fx30s user.err kernel: [ 0.479780] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:187
Mar 5 01:07:43 fx30s user.err kernel: [ 0.479841] qup_i2c qup_i2c.0: I2C slave addr:0x3a not connected
Mar 5 01:07:43 fx30s user.info kernel: [ 0.526720] swimcu_gpio_retrieve 0
Mar 5 01:07:43 fx30s user.info kernel: [ 0.526842] swimcu_pm_sysfs_init: success func 1
Mar 5 01:07:43 fx30s user.info kernel: [ 0.527117] swimcu_pm_sysfs_init: success func 2
Mar 5 01:07:43 fx30s user.debug kernel: [ 0.527605] gpiochip_add: registered GPIOs 100 to 107 on device: swimcu
Mar 5 01:07:43 fx30s user.info kernel: [ 0.545917] swimcu_device_init: success
Mar 5 01:07:43 fx30s user.info kernel: [ 0.546101] GPIOs are not in Slimbus mode
Mar 5 01:07:43 fx30s user.warn kernel: [ 0.546162] msm_slim_ctrl: probe of msm_slim_ctrl.1 failed with error -5
Mar 5 01:07:43 fx30s user.info kernel: [ 0.546864] usbcore: registered new interface driver usbfs
Mar 5 01:07:43 fx30s user.info kernel: [ 0.547016] usbcore: registered new interface driver hub
Mar 5 01:07:43 fx30s user.info kernel: [ 0.547291] usbcore: registered new device driver usb
Mar 5 01:07:43 fx30s user.info kernel: [ 0.548145] Advanced Linux Sound Architecture Driver Initialized.
Mar 5 01:07:43 fx30s user.info kernel: [ 0.549275] NetLabel: Initializing
Mar 5 01:07:43 fx30s user.info kernel: [ 0.549305] NetLabel: domain hash size = 128
Mar 5 01:07:43 fx30s user.info kernel: [ 0.549336] NetLabel: protocols = UNLABELED CIPSOv4
Mar 5 01:07:43 fx30s user.info kernel: [ 0.549458] NetLabel: unlabeled traffic allowed by default
Mar 5 01:07:43 fx30s user.info kernel: [ 0.550587] Switched to clocksource gp_timer
Mar 5 01:07:43 fx30s user.info kernel: [ 0.614008] NET: Registered protocol family 2
Mar 5 01:07:43 fx30s user.info kernel: [ 0.615962] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
Mar 5 01:07:43 fx30s user.info kernel: [ 0.616023] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
Mar 5 01:07:43 fx30s user.info kernel: [ 0.616084] TCP: Hash tables configured (established 2048 bind 2048)
Mar 5 01:07:43 fx30s user.info kernel: [ 0.616175] TCP: reno registered
Mar 5 01:07:43 fx30s user.info kernel: [ 0.616206] UDP hash table entries: 256 (order: 0, 4096 bytes)
Mar 5 01:07:43 fx30s user.info kernel: [ 0.616236] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Mar 5 01:07:43 fx30s user.err kernel: [ 0.771036] smem_find(9, 464): wrong size 912
Mar 5 01:07:43 fx30s user.warn kernel: [ 0.771066] get_nand_partitions: no flash partition table in shared memory
Mar 5 01:07:43 fx30s user.err kernel: [ 0.780039] Notify: smsm init
Mar 5 01:07:43 fx30s user.info kernel: [ 0.788737] NET: Registered protocol family 27
Mar 5 01:07:43 fx30s user.info kernel: [ 0.790019] apr_tal:Q6 Is Up
Mar 5 01:07:43 fx30s user.info kernel: [ 0.790233] apr_tal:Modem Is Up
Mar 5 01:07:43 fx30s user.info kernel: [ 0.792858] modem_8960_init: modem fatal driver init'ed.
Mar 5 01:07:43 fx30s user.info kernel: [ 0.793316] lpass_fatal_init: lpass SSR driver init'ed.
Mar 5 01:07:43 fx30s user.notice kernel: [ 0.793926] msm_rpm_log_probe: OK
Mar 5 01:07:43 fx30s user.info kernel: [ 0.796673] futex hash table entries: 256 (order: -1, 3072 bytes)
Mar 5 01:07:43 fx30s user.notice kernel: [ 0.986296] VFS: Disk quotas dquot_6.5.2
Mar 5 01:07:43 fx30s user.warn kernel: [ 0.986784] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 5 01:07:43 fx30s user.info kernel: [ 0.991454] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Mar 5 01:07:43 fx30s user.info kernel: [ 0.993529] aufs 3.14-20140915
Mar 5 01:07:43 fx30s user.info kernel: [ 0.993590] msgmni has been set to 293
Mar 5 01:07:43 fx30s user.info kernel: [ 0.997344] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
Mar 5 01:07:43 fx30s user.info kernel: [ 0.997375] io scheduler noop registered
Mar 5 01:07:43 fx30s user.info kernel: [ 0.997405] io scheduler deadline registered
Mar 5 01:07:43 fx30s user.info kernel: [ 0.997802] io scheduler cfq registered (default)
Mar 5 01:07:43 fx30s user.info kernel: [ 0.998046] wake-n_gpio wake-n_gpio: wake_n probe
Mar 5 01:07:43 fx30s user.info kernel: [ 0.998351] gpio_check_and_wake: wake-n_gpio77 STATE=SLEEP
Mar 5 01:07:43 fx30s user.info kernel: [ 1.140943] msm_serial: driver initialized
Mar 5 01:07:43 fx30s user.info kernel: [ 1.141156] ttyHS0, function 0 is not valid on application processor.
Mar 5 01:07:43 fx30s user.warn kernel: [ 1.141217] msm_serial_hs: probe of msm_serial_hs.0 failed with error -1
Mar 5 01:07:43 fx30s user.info kernel: [ 1.141370] msm_serial_hs module loaded
Mar 5 01:07:43 fx30s user.alert kernel: [ 1.151167] diag: Invalid Msg type 12 proc 2
Mar 5 01:07:43 fx30s user.err kernel: [ 1.151411] diag: In diag_smd_cntl_send_req, proc=0, Nothing to read from SMD
Mar 5 01:07:43 fx30s user.err kernel: [ 1.151472] diag: In diag_smd_cntl_send_req, proc=0, Nothing to read from SMD
Mar 5 01:07:43 fx30s user.err kernel: [ 1.151472] diag: In diag_smd_cntl_send_req, proc=0, Nothing to read from SMD
Mar 5 01:07:43 fx30s user.err kernel: [ 1.151533] diag: In diag_smd_cntl_send_req, proc=0, Nothing to read from SMD
Mar 5 01:07:43 fx30s user.err kernel: [ 1.151564] diag: In diag_smd_cntl_send_req, proc=0, Nothing to read from SMD
Mar 5 01:07:43 fx30s user.err kernel: [ 1.151625] diag: In diag_smd_cntl_send_req, proc=0, Nothing to read from SMD
Mar 5 01:07:43 fx30s user.err kernel: [ 1.151625] diag: In diag_smd_cntl_send_req, proc=0, Nothing to read from SMD
Mar 5 01:07:43 fx30s user.info kernel: [ 1.153731] diagchar initialized now
Mar 5 01:07:43 fx30s user.info kernel: [ 1.182847] brd: module loaded
Mar 5 01:07:43 fx30s user.debug kernel: [ 1.183000] wm8944_i2c_init
Mar 5 01:07:43 fx30s user.debug kernel: [ 1.183061] wm8944_i2c_probe
Mar 5 01:07:43 fx30s user.debug kernel: [ 1.183183] wm8944_device_init START
Mar 5 01:07:43 fx30s user.err kernel: [ 1.183427] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:187
Mar 5 01:07:43 fx30s user.err kernel: [ 1.190660] qup_i2c qup_i2c.0: I2C slave addr:0x1a not connected
Mar 5 01:07:43 fx30s user.err kernel: [ 1.190721] wm8944 0-001a: Failed to read ID register
Mar 5 01:07:43 fx30s user.debug kernel: [ 1.190721] wm8944_device_init - Failed to add children: -107
Mar 5 01:07:43 fx30s user.warn kernel: [ 1.190874] wm8944: probe of 0-001a failed with error -107
Mar 5 01:07:43 fx30s user.warn kernel: [ 1.191179] i2c-core: driver [tabla-i2c-core] using legacy suspend method
Mar 5 01:07:43 fx30s user.warn kernel: [ 1.191210] i2c-core: driver [tabla-i2c-core] using legacy resume method
Mar 5 01:07:43 fx30s user.info kernel: [ 1.192217] msm_nand_init: Enabling failed write checking
Mar 5 01:07:43 fx30s user.info kernel: [ 1.192369] msm_nand_probe: phys addr 0x1b400000
Mar 5 01:07:43 fx30s user.info kernel: [ 1.192430] msm_nand_probe: dmac 0x3
Mar 5 01:07:43 fx30s user.info kernel: [ 1.192522] msm_nand_probe: allocated dma buffer at d006c000, dma_addr 4f0c8000
Mar 5 01:07:43 fx30s user.err kernel: [ 1.192553] flash_onfi_probe: No partition info available
Mar 5 01:07:43 fx30s user.info kernel: [ 1.193224] status: c03020
Mar 5 01:07:43 fx30s user.info kernel: [ 1.193254] nandid: 1590ac2c maker 2c device ac
Mar 5 01:07:43 fx30s user.info kernel: [ 1.193254] Setting mtd->writebufsize to 0x800
Mar 5 01:07:43 fx30s user.info kernel: [ 1.193316] Found a supported NAND device
Mar 5 01:07:43 fx30s user.info kernel: [ 1.193316] NAND Controller ID : 0x4030
Mar 5 01:07:43 fx30s user.info kernel: [ 1.193346] NAND Device ID : 0x1590ac2c
Mar 5 01:07:43 fx30s user.info kernel: [ 1.193346] Buswidth : 8 Bits
Mar 5 01:07:43 fx30s user.info kernel: [ 1.193377] Density : 512 MByte
Mar 5 01:07:43 fx30s user.info kernel: [ 1.193377] Pagesize : 2048 Bytes
Mar 5 01:07:43 fx30s user.info kernel: [ 1.193407] Erasesize: 131072 Bytes
Mar 5 01:07:43 fx30s user.info kernel: [ 1.193407] Oobsize : 64 Bytes
Mar 5 01:07:43 fx30s user.info kernel: [ 1.193407] CFG0 Init : 0xa8d408c0
Mar 5 01:07:43 fx30s user.info kernel: [ 1.193438] CFG1 Init : 0x0004745c
Mar 5 01:07:43 fx30s user.info kernel: [ 1.193438] ECCBUFCFG : 0x00000203
Mar 5 01:07:43 fx30s user.info kernel: [ 1.193468] CW size : 528 bytes
Mar 5 01:07:43 fx30s user.info kernel: [ 1.193468] BCH ECC : disabled
Mar 5 01:07:43 fx30s user.notice kernel: [ 1.193560] 7 cmdlinepart partitions found on MTD device msm_nand
Mar 5 01:07:43 fx30s user.notice kernel: [ 1.193560] Creating 7 MTD partitions on "msm_nand":
Mar 5 01:07:43 fx30s user.notice kernel: [ 1.193590] 0x0000051c0000-0x0000052c0000 : "bootloader"
Mar 5 01:07:43 fx30s user.notice kernel: [ 1.196459] 0x0000052c0000-0x0000066c0000 : "kernel"
Mar 5 01:07:43 fx30s user.notice kernel: [ 1.212635] 0x0000066c0000-0x000009800000 : "rootfs"
Mar 5 01:07:43 fx30s user.notice kernel: [ 1.251396] 0x000009800000-0x00000bf80000 : "user0"
Mar 5 01:07:43 fx30s user.notice kernel: [ 1.284419] 0x00000bf80000-0x000014b00000 : "user1"
Mar 5 01:07:43 fx30s user.notice kernel: [ 1.395910] 0x000014b00000-0x000015000000 : "user2"
Mar 5 01:07:43 fx30s user.notice kernel: [ 1.401983] 0x000015000000-0x000015200000 : "user3"
Mar 5 01:07:43 fx30s user.info kernel: [ 1.406683] spi_qsd spi_qsd.0: master is unqueued, this is deprecated
Mar 5 01:07:43 fx30s user.info kernel: [ 1.407355] rmnet_init: BAM devices[8]
Mar 5 01:07:43 fx30s user.info kernel: [ 1.417854] usbcore: registered new interface driver kaweth
Mar 5 01:07:43 fx30s user.info kernel: [ 1.417884] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
Mar 5 01:07:43 fx30s user.info kernel: [ 1.418037] usbcore: registered new interface driver pegasus
Mar 5 01:07:43 fx30s user.info kernel: [ 1.418129] usbcore: registered new interface driver rtl8150
Mar 5 01:07:43 fx30s user.info kernel: [ 1.418281] usbcore: registered new interface driver asix
Mar 5 01:07:43 fx30s user.info kernel: [ 1.418403] usbcore: registered new interface driver cdc_ether
Mar 5 01:07:43 fx30s user.info kernel: [ 1.418525] usbcore: registered new interface driver dm9601
Mar 5 01:07:43 fx30s user.info kernel: [ 1.418647] usbcore: registered new interface driver smsc75xx
Mar 5 01:07:43 fx30s user.info kernel: [ 1.418831] usbcore: registered new interface driver smsc95xx
Mar 5 01:07:43 fx30s user.info kernel: [ 1.418953] usbcore: registered new interface driver net1080
Mar 5 01:07:43 fx30s user.info kernel: [ 1.419075] usbcore: registered new interface driver cdc_subset
Mar 5 01:07:43 fx30s user.info kernel: [ 1.419166] usbcore: registered new interface driver zaurus
Mar 5 01:07:43 fx30s user.info kernel: [ 1.419288] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
Mar 5 01:07:43 fx30s user.info kernel: [ 1.419471] usbcore: registered new interface driver int51x1
Mar 5 01:07:43 fx30s user.info kernel: [ 1.419655] usbcore: registered new interface driver cdc_ncm
Mar 5 01:07:43 fx30s user.info kernel: [ 1.419685] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mar 5 01:07:43 fx30s user.err kernel: [ 1.433694] msm_hsusb_host msm_hsusb_host: unable to find transceiver
Mar 5 01:07:43 fx30s user.info kernel: [ 1.446909] platform msm_hsusb_host: Driver msm_hsusb_host requests probe deferral
Mar 5 01:07:43 fx30s user.info kernel: [ 1.460155] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
Mar 5 01:07:43 fx30s user.info kernel: [ 1.460247] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
Mar 5 01:07:43 fx30s user.info kernel: [ 1.480695] msm_hsic_host msm_hsic_host: irq 264, io mem 0x12540000
Mar 5 01:07:43 fx30s user.info kernel: [ 1.500656] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
Mar 5 01:07:43 fx30s user.info kernel: [ 1.503097] hub 1-0:1.0: USB hub found
Mar 5 01:07:43 fx30s user.info kernel: [ 1.503219] hub 1-0:1.0: 1 port detected
Mar 5 01:07:43 fx30s user.info kernel: [ 1.505081] usbcore: registered new interface driver cdc_acm
Mar 5 01:07:43 fx30s user.info kernel: [ 1.505112] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Mar 5 01:07:43 fx30s user.info kernel: [ 1.505386] usbcore: registered new interface driver usbserial
Mar 5 01:07:43 fx30s user.info kernel: [ 1.505508] usbcore: registered new interface driver ftdi_sio
Mar 5 01:07:43 fx30s user.info kernel: [ 1.505631] usbserial: USB Serial support registered for FTDI USB Serial Device
Mar 5 01:07:43 fx30s user.info kernel: [ 1.505875] usbcore: registered new interface driver option
Mar 5 01:07:43 fx30s user.info kernel: [ 1.505966] usbserial: USB Serial support registered for GSM modem (1-port)
Mar 5 01:07:43 fx30s user.info kernel: [ 1.506271] usbcore: registered new interface driver qcserial
Mar 5 01:07:43 fx30s user.info kernel: [ 1.506363] usbserial: USB Serial support registered for Qualcomm USB modem
Mar 5 01:07:43 fx30s user.info kernel: [ 1.506485] usbcore: registered new interface driver sierra
Mar 5 01:07:43 fx30s user.info kernel: [ 1.506607] usbserial: USB Serial support registered for Sierra USB modem
Mar 5 01:07:43 fx30s user.info kernel: [ 1.506699] usbcore: registered new interface driver GobiSerial
Mar 5 01:07:43 fx30s user.info kernel: [ 1.506821] usbserial: USB Serial support registered for GobiSerial
Mar 5 01:07:43 fx30s user.info kernel: [ 1.506943] usbcore: registered new interface driver usb_ehset_test
Mar 5 01:07:43 fx30s user.info kernel: [ 1.507034] msm_otg msm_otg: msm_otg probe
Mar 5 01:07:43 fx30s user.err kernel: [ 1.507095] msm_otg msm_otg: failed to get phy_clk
Mar 5 01:07:43 fx30s user.info kernel: [ 1.507187] msm_otg msm_otg: OTG regs = d0076000
Mar 5 01:07:43 fx30s user.info kernel: [ 1.509934] misc usb_link: registered misc device minor 47
Mar 5 01:07:43 fx30s user.debug kernel: [ 1.511185] msm_hsusb msm_hsusb: ci_hdrc_msm_probe
Mar 5 01:07:43 fx30s user.debug kernel: [ 1.511704] ci_hdrc ci_hdrc.0: ChipIdea HDRC found, lpm: 0; cap: d0078100 op: d0078140
Mar 5 01:07:43 fx30s user.info kernel: [ 1.513963] mbim_init: initialize 1 instances
Mar 5 01:07:43 fx30s user.info kernel: [ 1.514329] mbim_init: Initialized 1 ports
Mar 5 01:07:43 fx30s user.info kernel: [ 1.519822] rndis_qc_init: initialize rndis QC instance
Mar 5 01:07:43 fx30s user.info kernel: [ 1.521501] android_usb gadget: android_usb ready
Mar 5 01:07:43 fx30s user.info kernel: [ 1.522966] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8018-core/pm8xxx-pwrkey/input/input0
Mar 5 01:07:43 fx30s user.info kernel: [ 1.525530] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
Mar 5 01:07:43 fx30s user.info kernel: [ 1.525866] i2c /dev entries driver
Mar 5 01:07:43 fx30s user.warn kernel: [ 1.527483] pm8xxx-adc supply pa_therm not found, using dummy regulator
Mar 5 01:07:43 fx30s user.info kernel: [ 1.527941] swimcu_hwmon_probe: start
Mar 5 01:07:43 fx30s user.info kernel: [ 1.528246] swimcu_hwmon_probe: success num 2
Mar 5 01:07:43 fx30s user.info kernel: [ 1.552235] pm8xxx_tm_probe: OK
Mar 5 01:07:43 fx30s user.info kernel: [ 1.552998] usbcore: registered new interface driver usbhid
Mar 5 01:07:43 fx30s user.info kernel: [ 1.553029] usbhid: USB HID core driver
Mar 5 01:07:43 fx30s user.info kernel: [ 1.554433] usbcore: registered new interface driver snd-usb-audio
Mar 5 01:07:43 fx30s user.err kernel: [ 1.556386] voice_allocate_shared_memory: ION memory allocation failed
Mar 5 01:07:43 fx30s user.info kernel: [ 1.556783] msm_pcm_probe: dev name msm-voip-dsp
Mar 5 01:07:43 fx30s user.info kernel: [ 1.557271] msm_pcm_probe: dev name msm-host-pcm-voice
Mar 5 01:07:43 fx30s user.info kernel: [ 1.558583] msm_pcm_probe: dev name msm-pcm-dsp
Mar 5 01:07:43 fx30s user.info kernel: [ 1.558858] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
Mar 5 01:07:43 fx30s user.info kernel: [ 1.560445] mdm9615_audio_init(): Interface Type (wm8944) = 0
Mar 5 01:07:43 fx30s user.info kernel: [ 1.560476] mdm9615_audio_init - AR8, AR755xRD and CF3 configuration
Mar 5 01:07:43 fx30s user.warn kernel: [ 1.561025] soc-audio soc-audio.0: ASoC: machine mdm9615-nocodec-snd-card should use snd_soc_register_card()
Mar 5 01:07:43 fx30s user.info kernel: [ 1.575644] soc-audio soc-audio.0: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.576072] soc-audio soc-audio.0: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.576468] soc-audio soc-audio.0: snd-soc-dummy-dai <-> CS-VOICE mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.576896] soc-audio soc-audio.0: snd-soc-dummy-dai <-> VoIP mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.577170] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-q6.241 mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.577475] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-q6.240 mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.577872] soc-audio soc-audio.0: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.578269] soc-audio soc-audio.0: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.578696] soc-audio soc-audio.0: snd-soc-dummy-dai <-> VoLTE mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.579124] soc-audio soc-audio.0: snd-soc-dummy-dai <-> DTMF_RX_HOSTLESS mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.579398] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-stub mapping ok
Mar 5 01:07:43 fx30s user.debug kernel: [ 1.579703] msm_asoc_pcm_new:
Mar 5 01:07:43 fx30s user.info kernel: [ 1.579734] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-stub mapping ok
Mar 5 01:07:43 fx30s user.debug kernel: [ 1.580009] msm_asoc_pcm_new:
Mar 5 01:07:43 fx30s user.info kernel: [ 1.580039] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-stub mapping ok
Mar 5 01:07:43 fx30s user.debug kernel: [ 1.580314] msm_asoc_pcm_new:
Mar 5 01:07:43 fx30s user.info kernel: [ 1.580344] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-stub mapping ok
Mar 5 01:07:43 fx30s user.debug kernel: [ 1.580802] msm_asoc_pcm_new:
Mar 5 01:07:43 fx30s user.info kernel: [ 1.580833] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-stub mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.581046] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-q6.224 mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.581260] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-q6.225 mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.581443] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-q6.32773 mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.581657] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-q6.32772 mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.581870] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-q6.32771 mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.581901] mdm9615_mc7_auxpcm_init()
Mar 5 01:07:43 fx30s user.info kernel: [ 1.582328] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-q6.2 mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.582542] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-q6.3 mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.582939] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-q6.0 mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.583152] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-q6.1 mapping ok
Mar 5 01:07:43 fx30s user.info kernel: [ 1.595299] TCP: cubic registered
Mar 5 01:07:43 fx30s user.info kernel: [ 1.595330] NET: Registered protocol family 17
Mar 5 01:07:43 fx30s user.notice kernel: [ 1.596459] Registering SWP/SWPB emulation handler
Mar 5 01:07:43 fx30s user.info kernel: [ 1.604639] clock_late_init() disabled 43 unused clocks
Mar 5 01:07:43 fx30s user.info kernel: [ 1.607202] sps:BAM 0x124c2000 is registered.
Mar 5 01:07:43 fx30s user.warn kernel: [ 1.612849] no pmic restart interrupt specified
Mar 5 01:07:43 fx30s user.info kernel: [ 1.615656] MSM Watchdog Initialized
Mar 5 01:07:43 fx30s user.info kernel: [ 1.615962] regulator-dummy: disabling
Mar 5 01:07:43 fx30s user.info kernel: [ 1.629909] msm_otg msm_otg: phy_reset: success
Mar 5 01:07:43 fx30s user.info kernel: [ 1.634274] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-04 23:58:10 UTC (345490)
Mar 5 01:07:43 fx30s user.info kernel: [ 1.634304] ### dt-test ### No testcase data in device tree; not running tests
Mar 5 01:07:43 fx30s user.info kernel: [ 1.635708] ALSA device list:
Mar 5 01:07:43 fx30s user.info kernel: [ 1.635739] #0: mdm9615-nocodec-snd-card
Mar 5 01:07:43 fx30s user.err kernel: [ 1.636075] Warning: unable to open an initial console.
Mar 5 01:07:43 fx30s user.info kernel: [ 1.645444] Freeing unused kernel memory: 1364K (c08d8000 - c0a2d000)
Mar 5 01:07:43 fx30s user.info kernel: [ 1.871051] msm_otg msm_otg: OTG state changed, charger_type NOT changed
Mar 5 01:07:43 fx30s user.notice kernel: [ 1.878437] ubi0: attaching mtd2
Mar 5 01:07:43 fx30s user.info kernel: [ 2.040714] usb 1-1: new high-speed USB device number 2 using msm_hsic_host
Mar 5 01:07:43 fx30s user.info kernel: [ 2.050816] ci_hdrc ci_hdrc.0: CI_HDRC_CONTROLLER_RESET_EVENT received
Mar 5 01:07:43 fx30s user.debug kernel: [ 2.051091] ci_hdrc ci_hdrc.0: Connected to host
Mar 5 01:07:43 fx30s user.info kernel: [ 2.051121] msm_otg msm_otg: OTG state changed, charger_type changed
Mar 5 01:07:43 fx30s user.info kernel: [ 2.073309] hub 1-1:1.0: USB hub found
Mar 5 01:07:43 fx30s user.info kernel: [ 2.073493] hub 1-1:1.0: 1 port detected
Mar 5 01:07:43 fx30s user.notice kernel: [ 2.185899] ubi0: scanning is finished
Mar 5 01:07:43 fx30s user.warn kernel: [ 2.194109] ubi0 warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 58, need 80
Mar 5 01:07:43 fx30s user.info kernel: [ 2.196551] msm_hsic_host msm_hsic_host: HSIC-USB in low power mode
Mar 5 01:07:43 fx30s user.notice kernel: [ 2.196642] ubi0: attached mtd2 (name "rootfs", size 49 MiB)
Mar 5 01:07:43 fx30s user.notice kernel: [ 2.196642] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Mar 5 01:07:43 fx30s user.notice kernel: [ 2.196673] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Mar 5 01:07:43 fx30s user.notice kernel: [ 2.196673] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Mar 5 01:07:43 fx30s user.notice kernel: [ 2.196703] ubi0: good PEBs: 394, bad PEBs: 0, corrupted PEBs: 0
Mar 5 01:07:43 fx30s user.notice kernel: [ 2.196734] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Mar 5 01:07:43 fx30s user.notice kernel: [ 2.196734] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1309882205
Mar 5 01:07:43 fx30s user.notice kernel: [ 2.196764] ubi0: available PEBs: 0, total reserved PEBs: 394, PEBs reserved for bad PEB handling: 58
Mar 5 01:07:43 fx30s user.notice kernel: [ 2.201129] ubi0: background thread "ubi_bgt0d" started, PID 78
Mar 5 01:07:43 fx30s user.info kernel: [ 2.228353] block ubiblock0_0: created from ubi0:0(rootfs)
Mar 5 01:07:43 fx30s user.notice kernel: [ 2.267541] random: nonblocking pool is initialized
Mar 5 01:07:43 fx30s user.info kernel: [ 3.798504] NET: Registered protocol family 1
Mar 5 01:07:43 fx30s user.notice kernel: [ 4.168075] ubi2: attaching mtd4
Mar 5 01:07:43 fx30s user.notice kernel: [ 5.189836] ubi2: scanning is finished
Mar 5 01:07:43 fx30s user.notice kernel: [ 5.219807] ubi2: attached mtd4 (name "user1", size 139 MiB)
Mar 5 01:07:43 fx30s user.notice kernel: [ 5.219838] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Mar 5 01:07:43 fx30s user.notice kernel: [ 5.219868] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Mar 5 01:07:43 fx30s user.notice kernel: [ 5.219868] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
Mar 5 01:07:43 fx30s user.notice kernel: [ 5.219899] ubi2: good PEBs: 1116, bad PEBs: 0, corrupted PEBs: 0
Mar 5 01:07:43 fx30s user.notice kernel: [ 5.219899] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
Mar 5 01:07:43 fx30s user.notice kernel: [ 5.219929] ubi2: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1581406212
Mar 5 01:07:43 fx30s user.notice kernel: [ 5.219960] ubi2: available PEBs: 8, total reserved PEBs: 1108, PEBs reserved for bad PEB handling: 80
Mar 5 01:07:43 fx30s user.notice kernel: [ 5.222462] ubi2: background thread "ubi_bgt2d" started, PID 148
Mar 5 01:07:43 fx30s user.info kernel: [ 5.301846] block ubiblock2_0: created from ubi2:0(user1_vol0)
Mar 5 01:07:43 fx30s user.notice kernel: [ 5.361178] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 158
Mar 5 01:07:43 fx30s user.notice kernel: [ 5.491652] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "user1_vol0"
Mar 5 01:07:43 fx30s user.notice kernel: [ 5.491683] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Mar 5 01:07:43 fx30s user.notice kernel: [ 5.491713] UBIFS (ubi2:0): FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 6475776 bytes (6 MiB, 51 LEBs)
Mar 5 01:07:43 fx30s user.notice kernel: [ 5.491744] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB)
Mar 5 01:07:43 fx30s user.notice kernel: [ 5.491744] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID BB9A08E6-1BE5-4008-9EE5-0AFD6F8A2F84, small LPT model
Mar 5 01:07:43 fx30s user.notice kernel: [ 6.343964] ubi1: attaching mtd3
Mar 5 01:07:43 fx30s user.notice kernel: [ 6.633145] ubi1: scanning is finished
Mar 5 01:07:43 fx30s user.notice kernel: [ 6.660827] ubi1: attached mtd3 (name "user0", size 39 MiB)
Mar 5 01:07:43 fx30s user.notice kernel: [ 6.660888] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Mar 5 01:07:43 fx30s user.notice kernel: [ 6.660888] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Mar 5 01:07:43 fx30s user.notice kernel: [ 6.660918] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
Mar 5 01:07:43 fx30s user.notice kernel: [ 6.660918] ubi1: good PEBs: 316, bad PEBs: 0, corrupted PEBs: 0
Mar 5 01:07:43 fx30s user.notice kernel: [ 6.660949] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
Mar 5 01:07:43 fx30s user.notice kernel: [ 6.660979] ubi1: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 2083858029
Mar 5 01:07:43 fx30s user.notice kernel: [ 6.660979] ubi1: available PEBs: 0, total reserved PEBs: 316, PEBs reserved for bad PEB handling: 80
Mar 5 01:07:43 fx30s user.notice kernel: [ 6.665466] ubi1: background thread "ubi_bgt1d" started, PID 177
Mar 5 01:07:43 fx30s user.info kernel: [ 6.711735] block ubiblock1_0: created from ubi1:0(legato)
Mar 5 01:07:43 fx30s user.info kernel: [ 6.833236] yaffs: dev is 32505861 name is "mtdblock5" rw
Mar 5 01:07:43 fx30s user.info kernel: [ 6.833267] yaffs: passed flags "tags-ecc-off"
Mar 5 01:07:43 fx30s user.notice kernel: [ 7.361269] SCSI subsystem initialized
Mar 5 01:07:43 fx30s user.info kernel: [ 7.551655] usbcore: registered new interface driver usb-storage
Mar 5 01:07:43 fx30s user.info kernel: [ 7.632900] mmc0: mci-version: 18
Mar 5 01:07:43 fx30s user.info kernel: [ 7.633938] mmc0: bam physical base=0x12182000
Mar 5 01:07:43 fx30s user.info kernel: [ 7.633969] mmc0: bam virtual base=0xd0378000
Mar 5 01:07:43 fx30s user.info kernel: [ 7.633999] sps:BAM 0x12182000 is registered.
Mar 5 01:07:43 fx30s user.info kernel: [ 7.634030] mmc0: BAM device registered. bam_handle=0xce5d2e00<6>[ 7.634396] sps:REVISION of BAM 0xd0378000 is 0x5.
Mar 5 01:07:43 fx30s user.info kernel: [ 7.634976] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 130
Mar 5 01:07:43 fx30s user.info kernel: [ 7.635006] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012180800
Mar 5 01:07:43 fx30s user.err kernel: [ 7.635067] mmc0: No card detect facilities available
Mar 5 01:07:43 fx30s user.info kernel: [ 7.644468] mmc0: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 136,0 dma -1 dmacrcri -1
Mar 5 01:07:43 fx30s user.info kernel: [ 7.644498] mmc0: 8 bit data mode disabled
Mar 5 01:07:43 fx30s user.info kernel: [ 7.644498] mmc0: 4 bit data mode enabled
Mar 5 01:07:43 fx30s user.info kernel: [ 7.644529] mmc0: polling status mode disabled
Mar 5 01:07:43 fx30s user.info kernel: [ 7.644529] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
Mar 5 01:07:43 fx30s user.info kernel: [ 7.644559] mmc0: Slot eject status = 0
Mar 5 01:07:43 fx30s user.info kernel: [ 7.644559] mmc0: Power save feature enable = 1
Mar 5 01:07:43 fx30s user.info kernel: [ 7.644590] mmc0: SPS-BAM data transfer mode available
Mar 5 01:07:43 fx30s user.info kernel: [ 8.199206] sps:BAM 0x12502000 is registered.
Mar 5 01:07:43 fx30s user.err kernel: [ 8.199572] enable_store: android_usb: already disabled
Mar 5 01:07:43 fx30s user.info kernel: [ 8.371890] Match for Function Name: diag, Int #0
Mar 5 01:07:43 fx30s user.info kernel: [ 8.401007] Match for Function Name: nmea, Int #2
Mar 5 01:07:43 fx30s user.info kernel: [ 8.401068] Match for Function Name: modem, Int #3
Mar 5 01:07:43 fx30s user.info kernel: [ 8.401098] Match for Function Name: at, Int #4
Mar 5 01:07:43 fx30s user.info kernel: [ 8.413184] Match for Function Name: rmnet0, Int #8
Mar 5 01:07:43 fx30s user.info kernel: [ 8.413276] frmnet_bind: RmNet(0) dual Speed, IN:ep7in OUT:ep5out
Mar 5 01:07:43 fx30s user.info kernel: [ 8.413306] ecm_native_function_bind_config: ecm_native_function_bind_config MAC: 00:00:00:00:00:00
Mar 5 01:07:43 fx30s user.warn kernel: [ 8.413459] android_usb gadget: using random self ethernet address
Mar 5 01:07:43 fx30s user.info kernel: [ 8.450450] usb0: MAC 4a:23:28:1b:9f:9a
Mar 5 01:07:43 fx30s user.info kernel: [ 8.450480] usb0: HOST MAC 00:14:3e:27:57:30
Mar 5 01:07:43 fx30s user.info kernel: [ 8.450511] Match for Function Name: cdc_ethernet, Int #19
Mar 5 01:07:43 fx30s user.info kernel: [ 8.450541] Match for Function Name: cdc_ethernet, Int #20
Mar 5 01:07:43 fx30s user.info kernel: [ 8.453929] msm_otg msm_otg: Avail curr from USB = 2
Mar 5 01:07:43 fx30s user.info kernel: [ 8.454021] ci_hdrc ci_hdrc.0: CI_HDRC_CONTROLLER_SUSPEND_EVENT received
Mar 5 01:07:43 fx30s user.info kernel: [ 8.553029] ci_hdrc ci_hdrc.0: CI_HDRC_CONTROLLER_RESUME_EVENT received
Mar 5 01:07:43 fx30s user.info kernel: [ 8.553120] android_disconnect: android_disconnect: Disconnected
Mar 5 01:07:43 fx30s user.info kernel: [ 8.557851] otg_pc = 3
Mar 5 01:07:43 fx30s user.info kernel: [ 8.564474] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
Mar 5 01:07:43 fx30s user.info kernel: [ 8.653593] android_setup: android_setup: Connected
Mar 5 01:07:43 fx30s user.info kernel: [ 8.657256] android_disconnect: android_disconnect: Disconnected
Mar 5 01:07:43 fx30s user.info kernel: [ 8.657927] android_work: android_work: sent uevent USB_STATE=CONNECTED
Mar 5 01:07:43 fx30s user.info kernel: [ 8.663360] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
Mar 5 01:07:43 fx30s user.info kernel: [ 8.768014] android_setup: android_setup: Connected
Mar 5 01:07:43 fx30s user.info kernel: [ 8.769265] android_work: android_work: sent uevent USB_STATE=CONNECTED
Mar 5 01:07:43 fx30s user.info kernel: [ 8.772012] android_usb gadget: high-speed config #1: android_usb
Mar 5 01:07:43 fx30s user.info kernel: [ 8.772195] msm_otg msm_otg: Avail curr from USB = 500
Mar 5 01:07:43 fx30s user.info kernel: [ 8.772256] android_setup: android_setup: Configured
Mar 5 01:07:43 fx30s user.debug kernel: [ 8.772379] diag: USB connected
Mar 5 01:07:43 fx30s user.info kernel: [ 8.773172] sps:REVISION of BAM 0xd03d8000 is 0x5.
Mar 5 01:07:43 fx30s user.debug kernel: [ 8.781352] diag: USB connected
Mar 5 01:07:43 fx30s user.info kernel: [ 8.831374] android_work: android_work: sent uevent USB_STATE=CONFIGURED
Mar 5 01:07:43 fx30s user.info kernel: [ 10.919578] ip_tables: (C) 2000-2006 Netfilter Core Team
Mar 5 01:07:43 fx30s user.info kernel: [ 11.201342] NET: Registered protocol family 10
Mar 5 01:07:43 fx30s user.info kernel: [ 11.307736] ip6_tables: (C) 2000-2006 Netfilter Core Team
Mar 5 01:07:43 fx30s user.info kernel: [ 11.667663] nf_conntrack version 0.5.0 (2372 buckets, 9488 max)
Mar 5 01:07:43 fx30s user.info kernel: [ 12.534075] nmea: smd opened