Hello all, I’ve recently encountered a glitch where my FX30 is sending three messages instead of one in the stream. It is not linked to one edge action that I can tell and happens for multiple variables, not just one. In these three messages, the first two messages will have the previous value of a…

Hello Wilson, Could you send me a link to the device? Are you using Store and forward? Heartbeat? I can check your communication parameters. Most likely that is the root cause of multiple messages.

Hello David, I don’t think we are using any of these features, but I’ve sent you an email with a link to the device. One thing I’ve noticed with the duplicate messages is the delta shown in the stream is higher than our other devices. Thanks, Wilson Teachey

Hi all! I also have this problem on my FX30S devices. But this forwarding of three messages occurs only at the time of device reboot. Just like you described, the first two messages have the previous value and only the third is sent with the current value. It also bothers me a lot, since the gatewa…

Hello Wilson and Vitali, Are the related repeated values linked to virtual ressources ? Moreover, Is the tested Octave FW version prior to 3.2.0 ? Thanks

Thanks for sharing and contributing! I do not think that our device is rebooting, but I can look into it. I think we get ~140 instances of these duplicate messages a day, so that would be a lot of reboots. However, it would explain some of the erratic behavior associated with it and why it does not …

Hello Frederic, Yes the message that is sent contains around 20 variables where some are virtual resources, some are the values of some Energiya inputs (we are using the Universal Converter + and the addON 8i), and some are the FX30 inputs. And yes, the FX30 is on 3.5.2.

Most likely you know about this, but still I will say: if the cellular network coverage is poor and the cellular network signal disappears, then the watchdog timer built into the FX30S gateway can reboot your gateway. And by default, the value of the watchdog timer is 15 minutes. Configuri…

Yes, these repeated messages come from virtual resources that, when their value is updated, send it to the stream. So it turns out, in my case, that during a reboot, apparently the virtual resource is updated several times with the previous value written to it, as a result of which these values ente…

Confirmation that the problem is old is here on the forum: [image] Octave edge 3.0.2 / 3.10 bug - virtual volatile resource cloud observation fired twice for every single edge action write Octave Use case An edge action writes some data to a non-volatile virtual resource …

Hello Vitali, Thanks for this info, hopefully this will help @djudkins with his search. I can’t follow much in this other forum post, but I will try to read up on the relevant documentation. If this issue is three years old, I hope it can get resolved. Wilson Teachey

FX30 sending three messages instead of one intermittently

Octave

v.babich January 27, 2023, 4:15pm 10

Confirmation that the problem is old is here on the forum:

Topic		Replies	Views
No Stream messages being sent in Octave Octave	6	526	July 10, 2023
Stream stopped working on the FX30S Octave	1	536	February 8, 2022
Rebooting FX30 using Edge Actions Octave	2	429	October 11, 2023
Octave Edge 3.0.2 \| Patch Release for FX30 Octave	0	497	October 13, 2020
A command on Virtual Ressource doesn't modify the ressource Octave	5	597	July 24, 2020

FX30 sending three messages instead of one intermittently

Related topics