BC127-DUT Mode for EMC Tests

Hi there. We use the BC127 APTX FW.7.2… For the EMC and Radio tests in Europe we need to put the module in an special DUT (Device Under Test) mode. How can I achieve this? We use the UART and the PCM Interface.
Thanks in advance, Matthias

Hi,

You may buy BC127 Discovery Board to test it.
https://www.digikey.com/catalog/en/partgroup/bc127-discovery-board/44458

Thanks,

Thanks Donald, got in the mean time software from SIerra to do certification tests directly on my board. Worked well.