When installing this radio firmware MC7354_05.05.58.05_VZW_005.032_000
I get the error Could not read memory type from radio module firmware
Hi @doggett,
Welcome you to our community!
Please upgrade to latest firmware and radio firmware for your RV50 Airlink following the link below:
https://source.sierrawireless.com/resources/airlink/software_downloads/rv50/rv50-firmware-list/#sthash.nKUXG8eh.dpbs
You can refer to how to upgrade firmware and radio firmware for RV50 Airlink at Section 2: Gateway Configuration on page 25 in the link below:
https://source.sierrawireless.com/resources/airlink/software_reference_docs/airlink-rv-series---configuration-guide/#sthash.uOMEc0nh.dpbs
If the issue still happens, please share with me the screenshot of the issue.
Thanks,
I don’t know if your problem has been resolved; however, I had the same issue when updating the firmware to 4.16. I found that when you upgrade to 4.16, it overwrites the default radio drivers and corrupts the driver names. The modem cannot find the radio files and loads a generic driver that does not work for all tasks. When I tried to upgrade the radio firmware, it failed.
What did work was to add the correct radio driver to the system. If you goto Admin/Radio modem files, you can’t delete the bad files; however, if you try to add the file, it will overwrite the bad file and put in the correct name. After that, it works. Before doing this, I constantly got the memory read error.