MC7305 - No Networks Found in Manual Network Selection Mode!

[lotam]

Hi Shane,
Welcome to the forum.

Are you able to find the option to select technology (3G/4G) in Skylight?
Or are you able to find the modem/AT port in device manage? if yes, you can use AT command (AT!BAND=8) to force 3G only via this AT port.
However, some OEM may disable the option in Skylight or disable the AT port…

Also please refer to previous thread for similar discussion:

Limit aircard to 3G speed

Thanks, Matt. I have the EM7355 device. I was able to reference the AirPrime Embedded Module EM73xx/7655/8805 AT Command Reference document which provides some very good instruction. Truth be told, I had to brush up on my AT command. It’s been more than a decade since I worked on modem stuff at this level. After reading over the document, I noticed the AT!BAND command, which according to the documentation, “Configure the modem to operate on a set of frequency bands, look up available sets, …

Hope it helps.
Thx