HL780X Windows 7 drivers

[Donald]

Hi rafael.dias,

Please refer to the below links for more information.

HL7800 debug uart console toast after fw

I just updated a HL7800-M module to latest firmware 4.4.6.0 (from an ancient 1.7.5) without issue. but now the debug console which used to work fine is no longer responsive. I was using it to monitor CSQ during active data connections and such. The only data it outputs is below: U-Boot 2012.10 (Apr 10 2020 - 17:59:44) Board: ALT1250 Ver: 0.32-TG-D0 (PMP CPU Speed 120 MHz) DRAM: 2.5 MiB Now running in RAM - U-Boot at: 902a4000 Boot mode 3 Flash Manufacturer/Device ID is: 0x20bb18 Enable QUAD …

HL7802 won't boot on 4.5.4.0 and 4.4.6.0 but runs with 4.3.9.0

Hi @Donald Thanks for answering! I’m running SWITRACEMODE RnD: modem at AT+SWITRACEMODE? atshell : AT+SWITRACEMODE? atshell : RnD atshell : OK For version 4.4.6.0 I can no longer check since the hl7802 just blocks after the do_halt statement in the bootloader but I was running SWITRACEMODE RnD up until the time when the hl7802 stopped booting on 4.4.6.0. To clarify, since I got stuck on 4.4.6.0 when the hl7802 application stopped booting I downgraded to 4.5.4.0 where it still wouldn’t …