I have an EM9191 that had firmware SWIX55C_01.07.19.00 originally on it. I was able to get it to enter the factory test mode with the below commands.
AT!ENTERCND=“A710”
AT!DAFTMACT
I have update the firmware to SWIX55C_03.09.14.00, but when running the the AT!DAFTMACT command it returns “+CME ERROR: operation not supported”. Any idea why?
I don’t see such problem on FW 03.09.11.00, maybe you can try the same:
at+cfun?
+CFUN: 1
OK
ati3
Manufacturer: Sierra Wireless, Incorporated
Model: EM9191
Revision: SWIX55C_03.09.11.00 7bf975 jenkins 2022/06/10 20:36:01
IMEI: 355890340121234
IMEI SV: 22
FSN: 78214751101234
+GCAP: +CGSM
OK
at!entercnd="A710"
OK
at!daftmact
290300
OK
at!daftmdeact
290400
OK
at+cpin?
+CPIN: READY
OK