I am facing problems with the A2DP stream of our BC127 modules.
It ramdomly happens, that when pressing play at the source device the A2DP stream does not start. I then have to delete the BC127 from the bluetooth list of the source device, usually it works again after this.
What I´ve also noticed, that this happens especially when streaming AAC(iPhone). I was not able to reproduce this problem with SBC.
My current config:
Melody Audio V7.3
Build: 1544637564
STATE CONNECTED[1] CONNECTABLE[ON] DISCOVERABLE[ON] BLE[OFF]
LINK 10 CONNECTED A2DP 940C98310003 SUSPENDED AAC SNK 44100
OK
LIST 940C98310003 A2DP AVRCP
LIST A01081247D84 A2DP AVRCP
LIST 94652DC98A6D A2DP AVRCP
OK
AUDIO=0 0
AUDIO_ANALOG=15 15 1 OFF
AUDIO_DIGITAL=0 48000 64 100200 OFF
AUTOCONN=0
AUTO_DATA=OFF OFF
BALANCE=100 100
BATT_CONFIG=OFF 145 4250 1500 150
BC_SMART_CONFIG=68E3 28F0 89F7 D93C
BEACON_DATA=0 00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF 04 D2 16 2E EE
BLE_CONFIG=0 OFF 80 ON
BLE_CONN_PARAMS=128 12 24 40 0 400 100 400 400 64 400 400
BT_STATE_CONFIG=1 1
BT_VOL_CONFIG=A 60 10 1
CLASS_1=OFF
CMD_TO=20
COD=240404
CODEC=0 OFF
DEEP_SLEEP=OFF
DEVICE_ID=0001 0002 0003 0004 0005 0006 0007 0008
ENABLE_BATT_IND=OFF
ENABLE_LED=ON
ENABLE_SPP_SNIFF=OFF 0 0 0 0 0
GPIO_CONFIG=ON 0
HFP_CONFIG=OFF ON OFF OFF OFF OFF
HIGH_SPEED=OFF OFF
LOCAL_ADDR=20FABB1BB05F 000000000000
MAX_REC=2
MM=OFF OFF 0 OFF OFF OFF OFF OFF
MUSIC_META_DATA=OFF
MUSIC_OLD_AVRCP=OFF
NAME=bc127
NAME_SHORT=BC1BB05F
PIN=0000
PROFILES=0 0 2 0 0 0 0 0 0 0 0 0
REMOTE_ADDR=000000000000
SPP_UUID=00 00 11 01 00 00 10 00 80 00 00 80 5F 9B 34 FB
SSP_CAPS=3
TWS_CONFIG=OFF 1 2
UART_CONFIG=9600 OFF 0
USB_HOST=OFF
VREG_ROLE=1