I bought FX30 with WP7702 module. I can register it to Octave. To check LED operation, I performed 1-7 operation on “2. Commanding Resources” in the following URL. Getting Started : FX30 In this tutorial, we'll use Octave to: observe the value of the Analog Input available on the power…

Hello Takashi, Please see this link for controlling FX30 LED colors: GPIO Guides This topic describes how to configure a GPIO pin in Octave and verify that Octave can control/monitor it. This process is necessary to identify a device's pin in Octave as either input or output and wheth…

Why I cannot see user LED selection in Resourse

Octave

djudkins October 11, 2021, 4:28pm 2

Hello Takashi,

You should see these resources.

You configure these via Services → GPIO

Also,
See this forum entry:

I hope this solves your issue.

Topic		Replies	Views
Octave 3.20 FX30S Green signal and Red power LED - how to turn them off Octave	5	562	July 23, 2021
New FX30 Octave unit just powers-up solid red LED FX30	2	741	January 21, 2020
Dashboard for FX30 & FX30S resources won't show Octave	10	656	November 2, 2020
Analog input configuration Octave	3	456	March 4, 2020
Octave 3.2.1 - FX30S - ULPM wake up sources - what to do if FX30 falls asleep and never wakes or gets stuck in a loop	0	357	July 23, 2021

Why I cannot see user LED selection in Resourse

Related Topics