RV55 LTE A PRO - multi-RAB option

Good Morning

I’m trying to receive an answer to the topic below already addressed maybe wrongly to different sierrawireless department with a sort of urgent matter if feasible due to an implementation required by Italian Provider in the next months.

I have bought a RV55 LTE A PRO Router and I would know whether the related device is able to fulfill the following requirements in configuration:

  • multi-RAB
  • operator-specific QCI

since looking for them in DS I was not able to find any useful information.

Thanks for the answer

Hi @pasquale-manuele.gri,

Does your RV55 have the latest fỉmware installed, if not, you should install the latest firmware at the following link: https://source.sierrawireless.com/resources/airlink/software_downloads/rv55/rv55-firmware-list/#sthash.XidnRcbf.dpbs

About the features of the RV55 are clearly stated in the following attached document: https://source.sierrawireless.com/resources/airlink/hardware_reference_docs/airlink_rv55_userguide/#sthash.YD8wVbsS.YZetm99p.dpbs

In addition, I also found the radio module of the RV55 LTE-A Pro is EM7511 or EM7565. So please refer to more related documents at these links: