Has anyone been able to configure an RV55 in dual serial mode to provide two way RS232 communication on both ports? I have two weather stations that are configurable via RS232 connected. I have many RV50s configured this way with one device working flawlessly. And in single port mode the RV55 works with two way comms. However, in dual serial mode the two way comms stops functioning. Thanks
Hi erikbachmann,
- First at all, pleas check RV55’s firmware (ALEOS 4.12)
- Do you use correct “Dual Serial Port Adapter Cable”? ( please refer hardware user guide https://source.sierrawireless.com/resources/airlink/hardware_reference_docs/airlink_rv55_userguide/#sthash.e33TyMjp.dpbs
- Configuration Dual port mode : Serial -> RS232 configuration -> Enable dual mode
- Configure Port 1 ( AT or TCP or UDP), for TCP/UDP please configure PAP-> set server Address/Port
- Configure port 2 ( AT or TCP or UDP), for TCP/UDP please configure PAP-> set server Address/Port
- Apply and reboot
My RV55 is working well with that configuration
Thanks
1 Like