No Root SSH ACCESS on WP7702 FX30

[jyijyi]

How many modules are seeing this issue?

I think there are three possible solutions:

1. contact Sierra FAE to get a tool to enable AT!PARTITION so that you can change the partition size of userapp patition and format this partition.
2. if just happening to one particular module, ask the Sierra FAE to level-3 unlock the module and enable the AT!PARTITION command for you.
3. write an unsandboxed legato application to format the userapp partition like this:

Swiflash -r broken with release 12 on wp77xx?

According to the release note of fw r12, QTI9X07-2870 is to fix userapp partition being erased which is security hole. You might also try the following without downgrading to older version: (Be careful of the mtd number, different FW might have different mtd number for userapp partition !!! ) root@swi-mdm9x28-wp:~# cat /proc/mtd|grep userapp -i mtd16: 08300000 00040000 "userapp" root@swi-mdm9x28-wp:~# pwd /home/root root@swi-mdm9x28-wp:~# ls UART_Test1.wp77xx.update root@swi-mdm9x28-wp:~# fl…

If you cannot download the legato application to the module due to SSH problem, you might need to upload the application to AVMS and ask module to connect to it by AT+WDSS=1,1 command.

BTW, you can also run wireshark on linux PC to see why there is connection refuse.
Here says shutting down the firewall on module side can help:

"ssh: connect to host 192.168.2.2 port 22: Connection refused"

Hi, i am trying to upgrade the firmware but could not make, and shows a connection error “ssh: connect to host 192.168.2.2 port 22: Connection refused” [Capture11] I restarted, pressed the reset button and i can ping but refuse connections. Could someone help me?