Hi,
I am trying to set BAND4 using the at!band command.
From the output of at!band=? , I am seeing there is two Band 4 information available. What is the difference between the two and which mask should I take ?
at!band=?
Index, Name, GW Band Mask L Band Mask TDS Band Mask
00, All bands 0002000007C00000 00000100330818DF 0000000000000000
01, Europe 3G 0002000000400000 0000000000000000 0000000000000000
02, North America 3G 0000000004800000 0000000000000000 0000000000000000
06, Europe 0002000000400000 00000000000800C5 0000000000000000
07, North America 0000000004800000 000000000300185A 0000000000000000
08, WCDMA ALL 0002000007C00000 0000000000000000 0000000000000000
09, LTE ALL 0000000000000000 00000100330818DF 0000000000000000
0000010000000000 - B41
0000000020000000 - B30
0000000010000000 - B29
0000000002000000 - B26
0000000001000000 - B25
0000000000080000 - B20
0000000000001000 - B13
0000000000000800 - B12
0000000000000080 - B8
0000000000000040 - B7
0000000000000010 - B5
**0000000000000008 - B4**
0000000000000004 - B3
0000000000000002 - B2
0000000000000001 - B1
0002000000000000 - B8 (900)
0000000004000000 - B5 (850)
**0000000002000000 - B4 (1700)**
0000000001000000 - B3 (1700)
0000000000800000 - B2 (1900)
0000000000400000 - B1 (2100)
OK
I tried setting,
• at!band=10,“verizonB4”,0,8
• at!band=10
There was no error in setting the band, but still the SIM is not getting registered to the network.
Is it the correct way to set the band4 ?