[MC7304/54] SAR GPIO behavior

Hi,

We are using Module MC7304/7354 SAR function by gpio.
But found an issue , the SAR GPIO pin46 didn’t pull high by default.

I don’t know why, but seems not meet SPEC.
Or , which step has error?

FW: 05.05.58.00

after config below command , the Pin46 default status still in low, so always in SAR mode.

1. At!entercnd=”A710”
2. at!custom=”GPIOSARENABLE”,1
3. AT!SARINTGPIOMODE=0