Help w/ a firewall rule

[b.gorsky]

I have an XR60 with an IPSEC VPN to my Barracuda F280 NextGen firewall. I have the VPN connected but am trying to add firewall rules to allow traffic to pass from my Barracuda (HQ) to a camera connected to the XR60 and vice-versa. I am a little confused on how to configure the firewall rules.

In addition to the default LAN segment of 192.168.1.1 I created a “Camera” segment with 192.168.13.31 - I want traffic to pass to the “Camera” segment. This is what I currently have in place:

VLAN 10 and VLAN 15 are behind my Barracuda on my LAN at HQ.

Any assistance would be appreciated.

[jerdung]

Hi @b.gorsky,

1. Please provide network topology diagram of how the XR60 is connected to your network and camera. Also include the device connections with their IP addresses.
2. Please share the log file on the XR60 under System > Regular Logs.
3. Is the XR60 device registered on AirVantage? If yes, please share the system URL link for further checking.

Thanks,

[b.gorsky]

Sorry for the delay.

log_09061a7f28b841d48d97cc869e120001_2025-08-16.txt (3.5 MB)

[jerdung]

Hi @b.gorsky,

I notice that you are already receiving support for this topic through the customer portal. So please continue to follow up there.

Thanks,