I want to confirm that my EM7565 module has B48 capability. The wireshark trace when I latch on to a cell at e.g. band 3, does not show B48 in the UE capability list. I am unable to latch on to a B48 cell. How can I confirm that I have the correct HW / Fiirmware for B48 operation?

Please check by at!band? [image] QMI SDK Band 66 bitmask value MC/EM Series my testing: Using SLQS SDK version: SLQS04.00.23 Invoking test: SLQSGetSysSelectionPrefExt Test Case 19 / 19 : Valid Test Case - All parameters set Return Code: 0 (0x0) Return Reason: Success…

I have a test AP radiating in B48 and the module does not see it in at+cops=? scan. It sees operator networks. at!band? Index, Name 00, All bands at!band=? Index, Name 00, All bands 01, Europe 3G 02, North America 3G 06, Europe 07, North America 08, WCDMA ALL 09, LTE ALL ati Manufactur…

then that means it can work on B48. testing on my side: ati3 Manufacturer: Sierra Wireless, Incorporated Model: EM7565 Revision: SWI9X50C_01.11.00.00 5ba42f jenkins 2019/06/28 09:51:52 IMEI: 353533100134710 IMEI SV: 10 FSN: UF913580100215 +GCAP: +CGSM OK at!entercnd=“A710” OK at!band? …

Thanks, I entered the commands and do not see B48: ati3 Manufacturer: Sierra Wireless, Incorporated Model: EM7565 Revision: SWI9X50C_01.07.02.00 6c91bc jenkins 2018/06/13 23:08:16 IMEI: 359260080179911 IMEI SV: 7 FSN: UF823389550210 +GCAP: +CGSM,+DS,+ES at!band? Index, Name, …

@colin.seltzer So the PTS states B48 is supported so it will be. You need to make sure that you have a ‘recent’ unit (so less than 12 months old) to make sure it is enabled by default. As it is part of CBRS and when the device was launched FCC had not formalised the bands we had to completely disab…

Hi Colin, I’m assuming you’ve likely solved this by now, but as I’m just going through the same issue I thought I’d post here as well to try and help others. I have just purchased an EM7565 from digikey (Sep '20), and have seen exactly the same issue as you describe (no band 42/43/48, and the same…

Following up, I can confirm that the enable-CBRS software does enable the bands on the EM7565_1103520 device I had purchased. End-to-end testing not yet performed, but the bands now appear in the AT!BAND=? listing, so I believe all is good.

EM7565 B48 capability?

IoT Modules MC/EM Series

jyijyi May 19, 2020, 12:17am 2

Please check by at!band?

Topic		Replies	Views
EM7565 Band 48 not enabled MC/EM Series	6	44	June 7, 2026
EM7565 lost band 42 support with latest FW MC/EM Series	34	3382	November 29, 2022
EM7511 - Tool to enable CBRS Band 48 IoT Modules	7	1155	October 4, 2022
EM7565 and LTE Band 48	5	1491	February 19, 2020
EM7565 band 48 support MC/EM Series	1	540	November 28, 2022

EM7565 B48 capability?

Related topics