We are trying to offload the updating and configuration of EM7455 modules onto a separate windows machine run by a technician before being inserted into our devices. The first step of this process is to expose the AT Port if it is not there. Typically no AT Port means the device is in MBIM-only mode…

You can see here [image] USSD Software for Windows 10 MC/EM Series you can open Configuration.ini and change “USBCOMP=8” and run the driver setup again

SWI9X30C_02.39.00.00 002.085_000 I wanted to update the new firmware for the EM7455 modem, but the firmware is not for windows. what should I do? I do not have a lune operating system

you can use fdt tool to download in windows command prompt: e.g. fdt2.exe -d g5k -ignswto -f SWI9X30C_02.39.00.00.cwe SWI9X30C_02.39.00.00_GENERIC_002.085_000.nvu

I connected to the terminal but I couldn’t flash it unfortunately, you wouldn’t be able to learn more about what to do, send a video or text how to flash a modem [ ]( https://translate.yandex.ru/ )

What did you see? Can you try the exe of other firmware?

К этому письму приложены ссылки на следующие файлы: 1. SWI9X30C_02.39.00.00_GENERIC_002.085_000.zip (60.7 Мб) Ссылка для скачивания файлов: https://cloud.mail.ru/stock/YNYirURjDg1Q5TXRr9nzmPGN Файлы будут храниться до 12.01.2025

EM7455 switch from MBIM to QMI mode in Windows

IoT Modules MC/EM Series

jyijyi July 12, 2024, 3:15pm 2

You can see here

Topic		Replies	Views
Yes, stupid question likely: Firmware install MC7455 Window MC/EM Series	5	2740	June 29, 2017
Updating EM7455 (in Ubuntu 24) MC/EM Series	5	1029	May 10, 2025
EM7511 only Have Network adapter, how to Swith to MBIM MC/EM Series	3	2684	August 9, 2019
EM7565 stuck in QMI mode but only with one DIAG port MC/EM Series debug	22	467	January 20, 2026
EM7455 Firmware Flash MC/EM Series	21	13563	June 19, 2017

EM7455 switch from MBIM to QMI mode in Windows

Related topics