Knowledge Base

Topic	Views	Activity
[Hilo] How to optimize the electrical consumption of Hilo? HL Series FAQ	3719	July 24, 2013
[Hilo] How many GPIOs are available on my Hilov1 module? HL Series FAQ	3859	July 24, 2013
[Hilo] Can I use two SIM cards with a HiLo? HL Series FAQ	3582	July 24, 2013
[Hilo] Why no response for any AT command after new upgrade? HL Series FAQ	3590	July 24, 2013
[Hilo] Why does Hilo not response to any AT command? HL Series FAQ	5168	July 24, 2013
[Hilo] Do I have to use a full UART or only RX/TX? HL Series FAQ	4249	July 24, 2013
[Hilo] When POK_IN should always connect to GND? HL Series FAQ	3840	July 24, 2013
[Hilo] single ended microphone Vs. differential ended microp HL Series FAQ	6235	July 24, 2013
[Hilo] Why would I need to keep RTC? HL Series FAQ	3690	July 24, 2013
[Hilo] HILO RESET HL Series FAQ	3630	July 24, 2013
[Hilo] How to do a correct RF layout? HL Series FAQ	3643	July 24, 2013
[Hilo] How do I certify my product? HL Series FAQ	7091	July 24, 2013
[Hilo] measurement of the current consumption HL Series FAQ	3951	July 24, 2013
[Hilo] What’s the meaning for <tim1> and<tim2> in KCNXTIMER? HL Series FAQ	3511	July 24, 2013
[Hilo] How to abort AT+KTCPCNX=1? HL Series FAQ	5239	July 24, 2013
[Hilo] How to know the call is MO or MT call? HL Series FAQ	3703	July 24, 2013
[Hilo] How to use AT+KATH? HL Series FAQ	3577	July 24, 2013
[Hilo] How to use command of <AT+CVHU>? HL Series FAQ	6511	July 24, 2013
[Hilo] What is the different between ATH[type] and AT+CHUP? HL Series FAQ	7051	July 24, 2013
[Hilo] What’s the main difference of Hilo3G and Hilo3GPS? HL Series FAQ	3984	July 24, 2013
[Hilo] How to get SIM phone number with AT command？ HL Series FAQ	25507	July 24, 2013
Hilo] Pre-certification for US N/W Operators HL Series FAQ	3277	July 24, 2013
[Hilo] How to disable the URC of CALL? HL Series FAQ	4236	July 24, 2013
[Hilo] maximum current consumption for Hilo3G USB HL Series FAQ	3175	July 24, 2013
[Hilo] How many MUX channels can be used in Hilo? HL Series FAQ	3098	July 23, 2013
[Hilo] how to use AT+KSYNC to indicate the network status? HL Series FAQ	3869	July 23, 2013
[Hilo] Why connection is always terminated abruptly? HL Series FAQ	3425	July 23, 2013
[Hilo] Why I fail to send big data to FTP server? HL Series FAQ	3458	July 23, 2013
[Hilo] How to set AT+CCFC? Could you give me an example? HL Series FAQ	6760	July 23, 2013
[Hilo] How long pulse of POK_IN needed to start up? HL Series FAQ	3222	July 23, 2013