Hi, I connect a device to the UART2 at 38400 baud: Using the adl_atCmdCreate function, I do: // Check if already open AT+WMFM=0,2,2 [OK] // Open it (if not) AT+WMFM=0,1,2 [OK] // Set baudrate AT+IPR=38400 [OK] // Set character framing (8 data 1 stop) AT+ICF=3 [OK] // Set flow control (DCE…

Upgrade to Firmware 7.4a and UART2

dsanchez January 26, 2010, 9:11am 2

Hi,

I confirm that the R7.4a does NO more keept the CTS signal high with AT+IFC=0,0 !

Why ?

Topic		Replies	Views
UART bug in OpenAT 7.x Open AT	24	9085	April 3, 2011
Can't configure UARTs in 7.4.0.a and above Open AT	9	2453	April 28, 2010
Fcm + wasr=1 + w32k=1 Open AT	1	779	October 19, 2007
UART2 not working General	16	5097	August 23, 2006
Problem with switching to AT mode Open AT	32	6256	February 17, 2011