Can the SPI on SL809X be used to transfer data after setting up a GPRS connection with AT commands on UART?
Ex:
AT+CGDCONT=1,“IP”,“apn”
AT+CGACT=1
AT+CGDATA (on SPI?)
(IP packets or PPP?)
Can the SPI on SL809X be used to transfer data after setting up a GPRS connection with AT commands on UART?
Ex:
AT+CGDCONT=1,“IP”,“apn”
AT+CGACT=1
AT+CGDATA (on SPI?)
(IP packets or PPP?)