Hello, We are updating our current firmware for FX30 Cat-M from the SWI FW 9.1 to 14. Our FW .cwe is built with the full FW from the Yocto chain and the reset.cwe (copied from the IDE source). The reset.cwe is used to reset the overlay and ensure that user’s data are the proper ones. Unfortunate…

Since FW R12 , it is not allowed to run the reset.cwe: [image] Swiflash -r broken with release 12 on wp77xx? Development tools Hey, After a board issue (see topic https://forum.mangoh.io/t/cannot-access-mangoh-yellow-wp7702/4848/27 ) I think there is a problem with the sw…

Thanks for your really fast answer! Since we can’t use that cwe, what is the new official way to clean the overlay?

As said before, erasing user partition is not allowed now. You need to downgrade to R11 of WP77 FW or before to perform this operation.

Downgrading from R14 to R9.1 is possible? I thought that since partition’s size changed in the R14 no downgrade to 9.1 can be done. Ok, so we will create some custom startup scripts to remove elements from the overlay.

Hello and happy new year, We are trying to create the script that allow us to upgrade the firmware and clean the overlay. Currently we are using: => /legato/systems/current/bin/fwupdate download firmware_full.cwe => flash_erase /dev/mtd16 0 0 Unfortunately, it doesn’t’ work well since fwupdate …

How about flash_erase /dev/mtd16 0 0 reboot fwupdate download xxx.cwe

To explain a bit more what we are trying to do is updating our FX30 that are somewhere in the world (so no local connection is possible) running our 9.1 custom FW to R14. Your solution will work with a local update and not in our case unfortunately. Are there any way to delay the automatic reboot…

Is /dev/mtd16 userapp partition in fw r9?

On the R9.1 the overlay can be erased with the reset.cwe so for now we use that. Before downgrading to 9.1, I’m currently trying to fwupdate between 2 R14 FW to test if the commands work properly.

I tried on WP76, I can still use fwupdate after deleting the userapp partition: root@swi-mdm9x28-wp:~# cat /proc/mtd|grep userapp -i mtd15: 08300000 00040000 "userapp" root@swi-mdm9x28-wp:~# root@swi-mdm9x28-wp:~# fwupdate query Connecting to service ... Firmware Version: SWI9X07Y_02.28.03.03 00000…

Reset image for FX30 Cat-M to clean overlay

IoT Gateways FX30

jyijyi November 5, 2021, 9:35am 2

Since FW R12 , it is not allowed to run the reset.cwe:

Topic		Replies	Views
Cannot update FW success in R16 WP Series	9	694	June 16, 2023
[FX30-4G LTE-M] Wrong /etc size in ls FW14 FX30	15	1559	November 24, 2021
Need help with root password reset on FX30 FX30	31	347	September 26, 2024
Swiflash failed on restoring FX30 Development tools	18	2265	December 9, 2019
Swiflash restore & flash	3	619	December 14, 2018

Reset image for FX30 Cat-M to clean overlay

Related topics