RC7620-1 AT command AT+CGCONTRDP < gw_addr> blank

IoT Modules RC76
1

Hi,

I use RC7620-1, send AT command AT+CGCONTRDP, the gateway address is blank.
Is this normal? Other APN, local address and DNS address are displayed.
Could anyone help me with this problem?
Thanks.

image
image701×318 18.2 KB

2

didn’t it already show something in AT+CGCONTRDP

3

But the gateway address is not shown.
We need to know the gateway address.

image
image935×410 61.6 KB

4

on my side, I saw the following where it can show gateway address for profile 2 (APN: ims), maybe this is network dependent:

at+cgcontrdp
+CGCONTRDP: 1,5,hkcsl,10.73.46.20,,10.144.148.129,10.144.148.5
+CGCONTRDP: 2,6,ims,10.16.204.234,36.3.16.0.53.0.127.60.0.1.0.1.167.239.15.87, 254.128.0.0.0.0.0.0.0.0.0.0.0.0.0.5,,,10.145.128.139,36.5.178.0.1.4.150.0.0.0.0.0.0.3.0.10,10.145.128.11,36.5.178.0.1.4.150.0.0.0.0.0.0.1.0.10

OK