Questions for the GSTATUS display information

Hi everyone,

I’m having some issues with the Gstatus command for the MC7354. I’m wondering if some firmware versions include the RSSI/RSRP values for RxM and RxD and others don’t. The device I’m working with currently has the output:

Manufacturer: Sierra Wireless, Incorporated
Model: MC7354
Revision: SWI9X15C_05.05.58.01 r27044 carmd-fwbuild1 2015/03/05 00:02:40
MEID: removed*
ESN: removed*
IMEI: removed*
FSN: J8720507430210
+GCAP: +CIS707-A, CIS-856, CIS-856-A, +CGSM, +CLTE2, +MS, +ES, +DS, +FCLASS


Current Time: 2863 Temperature: 31
Bootup Time: 0 Mode: ONLINE
System mode: LTE PS state: Attached
LTE band: B4 LTE bw: 15 MHz
LTE Rx chan: 2325 LTE Tx chan: 20325
EMM state: Registered Normal Service
RRC state: RRC Connected
IMS reg state: Full Srv IMS mode: Normal

RSSI (dBm): -75 Tx Power: 15
RSRP (dBm): -105 TAC: 3604 (13828)
RSRQ (dB): -16 Cell ID: 0568CF16 (90754838)
SINR (dB): 3.6


we have an issue in the field where sometimes one of the antennas will be removed and its nice to check if both antenna ports are receiving signal.

Other user can can see the rxd

Hmm ok, must not be the firmware version then. Do you know of any reason why each antenna post values wouldn’t be showing?

If it happens randomly, will it be hardware connection problem of the antenna?