No ssh access to WP7702

IoT Modules WP Series
1

Hi all,

I’m using WP7702 with the FW version 9. However, I cannot ssh into WP7702.
I downloaded the gobi serial drivers too to flash the module through switool .
WP7702_ssh_access|690x412

Note: It seems that even the ping doesn’t work for WP7702.
Anyone saw this same behaviour?

Regards,
KuzhWP7702_ssh_access

2

Are you using a VM? See this post for a suggestion.

3

How about “sudo ifconfig enp0s6u2i19 192.168.2.3”?

4

Hi jyijyi,

Still I can’t ping to 192.168.2.2
ping 192.168.2.2
PING 192.168.2.2 (192.168.2.2) 56(84) bytes of data.
From 192.168.2.3 icmp_seq=1 Destination Host Unreachable
From 192.168.2.3 icmp_seq=2 Destination Host Unreachable
From 192.168.2.3 icmp_seq=3 Destination Host Unreachable
From 192.168.2.3 icmp_seq=4 Destination Host Unreachable
From 192.168.2.3 icmp_seq=5 Destination Host Unreachable

Regards,
Kushani

5

see if this is the same issue as yours:
https://forum.sierrawireless.com/t/cannot-ping-wp7700-module-mangoh-red-from-ubuntu-vm/15616/11

6

Hi all,

Able to flash the module with swiflash , this allows me to ssh into the module.
Thanks for help

Regards,
Kushani

7

Hi @Kushani, I see you also created a SF ticket for this case, the issue on the PC side, right?

8

Yeah I did in the VM itself.

However, I notice when I attached the module to the VM I wasn’t able to ping(when ttyUSB ports were enumerated) . But if I use it as it’s, I was able to ping and ssh into the module.

Thanks Jordan for support.

Regards,
Kushani