Ubuntu 16.04 VM (Win10 host) can serially connect to module and login but cannot Ping 192.168.2.2. Can ping from Win10 (no VM running) so Module is ok.
Sierra Wireless USB ports are enabled to Ubuntu VM and GobiSerial/GobiNet is running.
…I’ve googled for 3 days and tried everything, but:
“ping 192.168.2.2” - always gets no response.
The infoconfig -a cmd does indicate the Sierra Module ports;
enp0s11u1i8 Link encap:Ethernet HWaddr 2a:6c:e1:8f:34:4e
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
enp0s11u1i19 Link encap:Ethernet HWaddr ca:04:c4:04:89:be
inet6 addr: fe80::3c81:8cf0:2da9:d5a7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:120 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
furthermore a dmesg indicates that enp0s11u1i8 renamed from eth0 and enp0s11u1i19 renamed from usb0
…also this:
[ 1041.405521] usb 1-1: New USB device found, idVendor=1199, idProduct=68c0
[ 1041.405524] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1041.405526] usb 1-1: Product: Sierra Wireless WP7700
[ 1041.405527] usb 1-1: Manufacturer: Sierra Wireless, Incorporated
[ 1041.405529] usb 1-1: SerialNumber: W881038511031015
[ 1041.413307] GobiSerial 1-1:1.0: GobiSerial converter detected
[ 1041.413395] usb 1-1: GobiSerial converter now attached to ttyUSB2
[ 1041.417183] GobiSerial 1-1:1.2: GobiSerial converter detected
[ 1041.417248] usb 1-1: GobiSerial converter now attached to ttyUSB3
[ 1041.423998] GobiSerial 1-1:1.3: GobiSerial converter detected
[ 1041.424072] usb 1-1: GobiSerial converter now attached to ttyUSB4
[ 1041.429120] QMAP Disabled
[ 1041.432308] GobiNet 1-1:1.8 eth0: register ‘GobiNet’ at usb-0000:00:0b.0-1, GobiNet Ethernet Device, 2a:6c:e1:8f:34:4e
[ 1041.435820] USB Speed : USB 2.0
[ 1041.450739] cdc_ether 1-1:1.19 usb0: register ‘cdc_ether’ at usb-0000:00:0b.0-1, CDC Ethernet Device, ca:04:c4:04:89:be
[ 1041.481633] cdc_ether 1-1:1.19 enp0s11u1i19: renamed from usb0
[ 1041.496966] GobiNet 1-1:1.8 enp0s11u1i8: renamed from eth0
[ 1041.520568] IPv6: ADDRCONF(NETDEV_UP): enp0s11u1i19: link is not ready
…
[ 1041.556615] IPv6: ADDRCONF(NETDEV_UP): enp0s11u1i8: link is not ready
What the heck am I missing?
HELP!