MC7710 "DHCP6ENABLE" option

IoT Modules MC/EM Series
1

Hello,
Is anybody know how this feature works? I tryed it but without sucess.

I enabled dhcp6 server on my card via command:
at!custom=“DHCP6ENABLE”,1
OK

I sucesfully connected via ipv6 pdp via command:
at!scact=1,1
OK
at!scpaddr=1
!SCPADDR: 1,“2A02:2121:0000:002D:0000:000C:D0F3:D001”

I tryed get address for wwan interface without sucess. Dhcpclient can’t get ipv6 address for wwan interface.

ifconfig wwan0

wwan0 Link encap:Ethernet HWaddr B6:4E:FF:28:01:07
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

dhclient -6 wwan0

2

What’s the version of sierra_net you are using?

Is that the latest one from Sierra website:
http://mycusthelp.net/SIERRAWIRELESS/_cs/AnswerDetail.aspx?aid=44

Thx

3

Hello,

Thank you very much for link to drivers. I compiled new drivers and everything working well :smiley: .

Regards,
Michal