Linux RHEL 10, EM9293 not being detected with pin 22 on high V

[jyijyi]

Other user can make it work after giving high voltage in pin20 and pin22:

Problems Getting EM9191 Working with M.2 to USB Adapters

Based on the official documentation, I have made the necessary configurations to hold the PCIE_DIS pin high to enable the USB3 interface. However, after connecting the 9190 device using a generic M.2 to USB adapter to a Windows system, nothing is detected. This behavior suggests that despite correctly setting the PCIE_DIS pin to logic level 1 to select the USB3 interface, there is an issue preventing the device from being recognized or functioning properly when connected. It’s possible that PCIe…

I also saw in the specification about the voltage: