It is becoming very aware that we purchased a product that does 10 million times more than what we need it to do, and do not have the time or programming experience to turn it into what we do need. What we need is for the device to accept a telnet session, and allow the usage of the AT commands to …

Hi, You can go through the “TCP_server” sample code provided with SDK(and provided as part of WIP or internet library). TCP client can connect to the the telnet server using the same approach. Please follow the following link for some reference : https://forum.sierrawireless.com/t/access-modem-t…

You’ll need a Public IP address for that…

You’ll need a Public IP address for that… Why would we need a public address, since both the FXT009 and the server that would be sending the SMS messages are both on the internal network. The only reason the server doesn’t connect to the FXT009 via serial cable is that the server is virtual, ru…

Thank you! I went through that, but as it states, I would still need to program the ability to take the telnet input, parse it to the AT commands, and then process it from there. That is just too much time for a simple SMS modem to attach to a virtual machine. So I have ordered a Serial to Eth…

That would be cost. You can get unlimited SMS deals with SIM card for relatively low cost. SMS gateways tend to charge per SMS which mounts up over time.

But not zero cost - so there is still a “price per SMS”. And most of these deals, if you read the terms, would prohibit “automated” use… You also have to consider the cost of the modem, providing the connection to the modem, having to site the modem somewhere with decent signal, etc,… Sending an…

The only server talking to the SMS modem is the network monitoring server. It will send an email alert, and a SMS alert on outage. The company was looking for a secondary/out of band pathway in case the outage was the internet connection. So using a SMS gateway via the internet would defeat the p…

Hi James, I recommend you also look at the Raven XE . We have numerous customers who use this product for ADSL backup, meaning that not only would it send and SMS if required (to notify ADSL outage), but it can also ensure business continuity over 3G if required. And pretty easy to integrate, as t…

Is there a simple telnet server code for the FXT009/FXT02?

IoT Gateways Legacy FX/FXT series

awneil February 19, 2013, 6:47am 6

Sorry - I thought you were talking about having the Telnet session over GPRS.

Does the VM have an internet connection?

If it does, why bother with a modem - why not use an SMS gateway

Dev studio in a VMWare environment

Topic		Replies	Views
Access modem thru Telnet Legacy FX/FXT series	8	5384	July 5, 2012
Send SMS using Telnet Legacy FX/FXT series	7	3118	November 16, 2009
AT Command to connect to remote machine using IP Legacy FX/FXT series	19	6274	November 6, 2009
FXT009 Legacy FX/FXT series	4	1684	June 18, 2013
How to communicate with a FX30 (Ethernet) FX30	3	1962	July 16, 2018

Is there a simple telnet server code for the FXT009/FXT02?

Related topics