When I switch my phone on, it automatically sets its clock from the network. How can this be done with Open-AT? I have seen the Open-AT sample that sends itself an SMS, but my phone does this without needing to send an SMS - how can Open-AT do the same? NITZ (Network Information and Time Zone) is…

OK, so I came across the AT+WLOC command: One of its response parameters is But what is “STLK Format”? No mention of it anywhere in any of the Wavecom documents. :frowning: After a bit of guessing, I stumbled upon “SIM TooLKit” Still no description anywhere in any Wavecom documentaion of the d…

Hi, just came across your post. I am looking at something similar. This is proabably too late for you though. Subscribe to the +WIND: 15 unsolicited response. It gives you the time information when u connect to the network over gprs(?). its a NITZ response if that means anything. Mark

However, the NITZ service is optional in GPRS network, so some providers may not support it. See also: wavecom.com/modules/movie/sc … me=Network and search for NITZ.

OK - this is what I’ve found so far: Using the Vodafone-UK network, GSM registration (+CREG: 1) does not give NITZ - in fact, I’ve never seen a +WIND: 15 wile using GSM only. The first GPRS registration after startup (+CGREG: 1) does give a +WIND: 15 If the unit loses and then regains GPRS regist…

Better to respond late than never… In our country, Vodafone bought an older operator, and they needed to rename the network. Since then we’re getting the WIND: 15 notifications 8) One after restart, and another after a GPRS registration, with different options. Other operators do not send anythin…

In this thread, sefer presents an example of contacting an NTP server via GPRS using WIP: wavecom.com/modules/movie/sc … =4789#4789

HI, i’m also the one who hopefully can obtain the TIME information from the GSM network. I haved try the WLOC command also. It really useless because the time infomation are actually “copy” from the CCLK param. Which mean what ever time sote inside CCLK will be copy out. Also, i found that the CCL…

I have done some playing about with reseting my GRPS bearer daily and I found at+cgatt=0 at+cgact=0 at+cgact=1 gets a WIND:15 response. Whether you actually want to do this is another question :open_mouth: at+CTZU is updated then.

This was vodaphone. Still experimenting, but it might help someone.

Get current date & time from network?

Forum announcements, ideas and feedback Around the water cooler

awneil December 8, 2009, 4:53pm 10

I think this is network-specific - so, what network were you using?

Topic		Replies	Views
Date ,Time ,Time Zone information Open AT	6	5084	December 14, 2009
Is there any AT command to get NITZ time Legacy AirPrime modules	3	3372	July 20, 2010
GPRS time Open AT	6	3198	September 2, 2008
Auto Clock Update Legacy AirPrime modules	6	2353	December 10, 2009
network time zone updation Forum and Source related topics	2	1496	February 2, 2014

Get current date & time from network?

Related topics