FX30: lost SSH key, can't SSH into the device

[jyijyi]

Does this work?

Factory Reset FX30

Thanks for the suggestion, but this command also didn’t work. After that, I connected through serial instead of ethernet, and I was able to use AT commands through that connection. I then reset the FX30, and I know that I successfully reset the FX30 because I had to create a new password whenever I connected again via SSH. What I’m confused about is that everything remained the same on the Octave website (virtual resources, edge actions, observations). I thought that a factory reset would reset …

SSH login to FX30

Hi Guru, Iotam, Please do not run the recover to factory links posted above on the FX30. They are meant for the WP8548 modules and have not officially been tested on the FX30, so we can’t know for sure the results. There is no default password. Upon first login, a user must enter their own password. However, you can reset the password. To do this, execute an FX30 factory reset by removing power, press and hold the reset button, apply power and then release the button after >10s. Upon next log…