Hiya, Does anyboy else think that it would be a good idea to have a FAQ area on either the Forum or Developer’s website? I’ve noticed that the same questions are asked (and answered) over and over again. Topics like I can’t find the SDK on the Wavecom website How do I download firmware to the Wa…

Hiya, There you go - I didn’t know it existed. And yes, it is all of the above (lots of references to OAT-3.00!). Exactly - although an electronic FAQ can be updated/maintained quicker/easier than the mainstream doco that is bundled with a Release. Jamie - any thoughts? ciao, Dave

The use of AT+CMEE=1 to get extended error info is certainly one for the FAQ viewtopic.php?f=16&t=3780&p=14663#p14663

The dependence of certain facilities on having specifc “Commercial Features” enabled; The trick of having a startup delay in your application - and all samples should do this Although the 1st one is another that should be properly documented in the “main” documentation - not just buried in a FAQ.

The need to enable USB (and UART2) before it can be used: wavecom.com/modules/movie/sc … 518#p15518 Update (2010): R7.4 (and later) opens the USB port automatically - this is a change from earlier firmware.

Another one: Connecting to I/O pins on Q2686 etc viewtopic.php?f=29&t=3942&start=0 viewtopic.php?f=78&t=3946&start=0 ciao, Dave

eg, viewtopic.php?f=37&t=3986&p=15720#p15717 viewtopic.php?f=30&t=2275&p=9244#p8408 It’s not “garbage” - it is PPP data. The module has been asked to create an IP connection, so it expects the external device to respond with IP packets in PPP format. Because it doesn’t get any PPP/IP packets, i…

Hiya, Don’t use the following code construct: while(1) { // do something } See viewtopic.php?f=36&t=3908&start=15#p16093 amongst others. ciao, Dave

See also: viewtopic.php?f=23&t=3922&p=16688#p15350 Example: viewtopic.php?f=16&t=4204&p=16686#p16686

Hiya, Looks like a number of users are having strange or intermittent issues with their modules that end up being resolved by fixing the module PSU. See here and here for a couple of examples. Of course, there’s also the Power Supply forum to peruse as well. ciao, Dave

FAQ forum/wiki?

Forum announcements, ideas and feedback Forum and Source related topics

awneil September 23, 2009, 1:09pm 8

viewtopic.php?f=5&t=3941&p=15544#p15544
viewtopic.php?f=21&t=3950&p=15542#p15542

Led0 not blinking

Topic		Replies	Views
About the new developer website Open AT	27	6911	June 4, 2008
Problems with DS2.3.0 and hardware compatibility Development tools	19	4593	January 16, 2013
Q2686 newbie questions Legacy AirPrime modules	8	1538	December 11, 2008
Modem Hangs Legacy FX/FXT series	22	3514	May 6, 2009
Wavecom GSM-Q2403 no GSM connection Legacy AirPrime modules	6	5321	November 24, 2017

FAQ forum/wiki?

Related topics