EM9291 FW upgrade problem

Hi,

I would like to know how to upgrade an image and multiple PRIs using FDT tool in Windows OS.
Below is the command I used but it always shows error.
Could anyone help with suggestions? Thanks.

fdt2.exe -d g5k -ignswto -mi -impref SWIX65C_02.17.08.00.cwe SWIX65C_02.17.08.00_GENERIC_030.081_001.nvu -f SWIX65C_02.17.08.00.cwe SWIX65C_02.17.08.00_PTCRB_030.077_001.nvu SWIX65C_02.17.08.00_ATT_030.094_001.nvu SWIX65C_02.17.08.00_VERIZON_030.092_001.nvu SWIX65C_02.17.08.00_TMO_030.042_001.nvu SWIX65C_02.17.08.00_ROGERS_030.033_001.nvu SWIX65C_02.17.08.00_BELL_030.018_001.nvu

I did this before on EM9191:


fdt2.exe -d g5k -ignswto  -mi -impref SWIX55C_03.09.11.00-002.cwe SWIX55C_03.09.11.00-001_GENERIC_030.044_001.nvu -f SWIX55C_03.09.11.00-002.cwe SWIX55C_03.09.11.00-001_ATT_030.046_001.nvu SWIX55C_03.09.11.00-001_BELL_030.007_001.nvu SWIX55C_03.09.11.00-001_DOCOMO_030.041_002.nvu SWIX55C_03.09.11.00-001_DT_030.038_001.nvu SWIX55C_03.09.11.00-001_GENERIC_030.044_001.nvu SWIX55C_03.09.11.00-001_KDDI_030.025_001.nvu SWIX55C_03.09.11.00-001_ORANGE_030.018_000.nvu SWIX55C_03.09.11.00-001_ROGERS_030.007_003.nvu SWIX55C_03.09.11.00-001_SOFTBANK_030.031_004.nvu SWIX55C_03.09.11.00-001_TELSTRA_030.041_000.nvu SWIX55C_03.09.11.00-001_TELUS_030.039_003.nvu SWIX55C_03.09.11.00-001_TMO_030.041_000.nvu SWIX55C_03.09.11.00-001_VERIZON_030.046_002.nvu

I remember it is working fine.
Have you tried in EM9191 first?

BTW, is your environment OK to upgrade one cwe + one .nvu file?

Hi @jyijyi

I found the reason, -ignswto needs to be followed by two spaces.
Thank you for your support.

Best Regards,
Jerry