Hi, Will the RMNET interface work with EM 9190 module? Because the USBCOMP=? commands show RMNET Not Supported. Please confirm. AT+GMR SWIX55C_03.10.07.00 e32f05 jenkins 2022/12/14 16:18:06 OK AT!USBCOMP=? !USBCOMP: AT!USBCOMP=,, - configuration index to which the composition applies, …

Ok, then does the EM 9190 module supports MBIM interface with Linux Kernel version 5.15?

Seems yes according to this user [image] EM9191 MBPL install error IoT Modules no . It did not enumerate /dev/ttyUSB port when I connect EM9191 to one of the USB port.

Yes it is MBIM only, you must use package “libmbim-utils” You can start the mbim connection by following these commands: sudo apt-get install libmbim-utils sudo touch /etc/mbim-network.conf sudo vim /etc/mbim-network.conf APN=internet APN_USER= APN_PASS= APN_AUTH= PROXY=yes Your APN will m…

EM9190: RMNET interface

IoT Modules MC/EM Series

jyijyi September 21, 2023, 10:51am 2

No, rmnet is not quite recommended for users
User should use MBIM interface

Setting up EM9291 Module

Topic		Replies	Views
Rmnet on EM9191 MC/EM Series	8	2357	March 4, 2022
EM9190: Data Connection without MBIM MC/EM Series	15	988	November 24, 2023
EM9293 RMNET driver not getting installed Development tools driver	10	190	April 29, 2025
EM9190 usbcomp settings IoT Modules	7	3272	March 10, 2021
Setting up EM9291 Module IoT Modules faq , driver	35	431	May 1, 2026

EM9190: RMNET interface

Related topics