Hi All, I am using EM7565 4G module for data connection. I installed GobiNet and GobiSerial Driver on ucLinux. AT!SCACT=1,1 returns OK with 1,1 and I got eth1 interface attached to it. ping -I eth1 8.8.8.8 was successful but hangs after pinging 7-8 times. If I halt it and ping again it hangs. D…

did you shut down the modem manager? how about doing DHCP like “udhcpc -i wwan0”? How about using the USB driver from MBPL? [image] Example on establishing data connection by AT!SCACT via MBPL R20 driver Development tools Here is an example to establish data connection b…

Hi @jyijyi udhcpc -i eth1 I am getting the IP address but its not updating the interface. I need to manually edit ifconfig to add IP I am not able to ping outside network also. /sys/class/net/eth1/ ----> I dont see qmi folder here I am not using ubuntu but running on uclinux. Not able to cross…

How about using the USB driver from MBPL? [image] Example on establishing data connection by AT!SCACT via MBPL R20 driver Development tools Here is an example to establish data connection by AT!SCACT via MBPL R20 driver: Module: WP7609 FW: R13 MBPL: R20 PC Environment:…

@jyijyi I am using the GobiNet and GobiSerial driver not default Linux drivers but not able to cross compile mmcli so using AT commands

no idea why it does not work for your platform on gobi driver, gobi driver should be working fine in Ubuntu platform you might need to try the driver in MBPL

EM7565 Ping hangs after 5-6 times

IoT Modules

jyijyi July 22, 2023, 3:12pm 4

How about using the USB driver from MBPL?

Topic		Replies	Views
EM7565: How to setup & Configure Data connection in CentOS 7 MC/EM Series	30	2392	September 4, 2020
Qmicli unable to communicate from raspberry pi to em7565 dev board via usb MC/EM Series	10	2655	November 9, 2022
MC7455 with GOBI drivers interface stays down MC/EM Series	19	6237	June 15, 2019
Can't Connect to internet connection	5	1040	November 5, 2021
EM7565 no connection IoT Modules	19	3739	October 8, 2020

EM7565 Ping hangs after 5-6 times

Related topics