Cannot get gps location with at commands

[jyijyi]

Just open the nmea port and see what is the output

Or you can see this

WP7702 Issue Between Radio and GNSS

with WP77 module FW 14, if network lost, I can see there is NMEA data at 1Hz at “cat /dev/nmea” after AT!GPSFIX=1,255,50 root@fx30:~# cm radio Power: ON Current Network Operator: Current RAT: Module not registered on network, RAT not available Status: Not registered and not currently searching for new operator (LE_MRC_REG_NONE) Signal: No signal strength (0) PS: Packet Swit…