Android SL8082 usb modem


#1

Hello!

I need to make my Android BSP support Sierra SL8082 usb modem. I have two sources with drivers for android 2.6.32 and linux 2.6.38. My kernel is 2.6.35. I installed sierra.c from Linux package, and sierra_net.c from android package and have such log in dmesg.

<6>usb 1-1: new high speed USB device using fsl-ehci and address 5
<4>usb 1-1: config 1 has an invalid interface number: 7 but max is 3
<4>usb 1-1: config 1 has no interface number 2
<6>sierra 1-1:1.0: Sierra USB modem converter detected
<6>usb 1-1: APM supported, enabling autosuspend.
<6>usb 1-1: Sierra USB modem converter now attached to ttyUSB0
<6>sierra 1-1:1.1: Sierra USB modem converter detected
<6>usb 1-1: APM supported, enabling autosuspend.
<6>usb 1-1: Sierra USB modem converter now attached to ttyUSB1
<6>sierra 1-1:1.3: Sierra USB modem converter detected
<6>usb 1-1: APM supported, enabling autosuspend.
<6>usb 1-1: Sierra USB modem converter now attached to ttyUSB2
<6>usb1: register ‘sierra_net’ at usb-fsl-ehci.1-1, Sierra Wireless USB-Ethernet Modem, 9a:1f:2a:ad:04:07

lsusb log : Bus 001 Device 005: ID 1199:68a3

Is it correct log? What i should do next to get internet access through that modem?


#2

Hi,

1st of all, I think this post should not appear in Open AT group.
Anyway, the log looks ok. As you mentioned you got the android package, you should able to use the build in driver to make data call.
Otherwise you can use the PPPD available on Linux…

L