jyijyi
January 8, 2023, 4:55pm
26
I don’t see there is modem port enumerated in your module, try this:
download the GenericDriverSetup_5087.exe from SOURCE website
open a folder and put GenericDriverSetup_5087.exe and Configuration.ini together
open Configuration.ini and add the following:
[Default Values]
CHECKFORDEVICE=0
LOCATIONDRIVER=1
WIN8LOCATION=1
USBCOMP=99
now install the driver again
Or you can see more information here:
After playing with the device, switching it between a linux and windows 10 environment, I found a temporary fix that alleviated my frustration for the most part with windows switching the device to MBIM only. As it seems that the OS has a preference for MBIM, this fix will direct the OS to use USBCOMP 8 (DM, AT, NMEA, MBIM) instead of defaulting to USBCOMP 9 (MBIM) when the system finds the device with a QMI interface. (My laptop is dual booted with Linux and windows, if i forget to change my co…
Can you kindly link the website for both the GenericDriverSetup_5087.exe and the Configuration.ini
Or were do i find configuration.ini
jyijyi
January 8, 2023, 5:06pm
28
I’m done and now the port’s aren’t showing and My pc stopped charging as well
jyijyi
January 9, 2023, 4:41pm
30
what is the relationship between the battery charging and the modem?
Just a little update, i think port 5 and 6 disappeared and other one’s appeared
jyijyi
January 9, 2023, 5:23pm
32
I saw there is modem port in your device manager
the modem icon disappeared
that was the qualcomm modem i placed in my laptop
jyijyi
January 11, 2023, 5:15pm
36
you can open Configuration.ini and change “USBCOMP=8” and run the driver setup again
jyijyi
January 11, 2023, 5:39pm
39
you can then send AT command through modem port in device manager
so if i wanted to do *124# what would i type in (or is there a manual on how to do at commands)
Both Tera and PuTTy won’t let me type anything in NMEA or DM
jyijyi
January 12, 2023, 12:57am
42
You should use modem port, not com3 or com10
I think it was port 11, Now i wanted to do *124# and i type in AT+CUSD=1 TO ACTIVATE USSD AND THEN DID AT+CUSD=1,"*124# but i got an +CME ERROR: retry operation
jyijyi
January 13, 2023, 1:30am
44
you need to check with the network operator if this is expected behavior
its suppose to show me my balance… additional question, can i make calls