Query airtime from provider

[johansimpson]

Hi all.

I would just like to know how to query the airtime available on my sim card from my provider.

On a normal cell phone i would dial *100# and then see the value…

How would one approach this with OpenAT ?

Regards
Johan

[victorjd]

Mostly the same. Check AT+CUSD command.

[awneil]

@johansimpson

On a normal cell phone i would dial *100# and then see the value…

Note that this is entirely network-specific - some networks use a different code, some use a different method (eg, SMS), and some don’t provide it at all!

Refill SIM!

I assume you’re talking about pre-pay calling credit here? So do that, then! Note that this is specific to the particular operator - some operators don’t provide this service, and others may use different code (Vodafone UK uses “*#1345#”) Note that this is actually an Unstructured Supplementary Service - so you can also send AT+cusd=1,"*#1345#"

Check credit

As I said in the post you quoted, So, if you don’t know how to find your remaining credit, you are going to have to ask your specific Service Provider how to do it - it has nothing to do with Wavecom or Open-AT. See above - there is no standard way to do this, so there obviously can’t be an ADL API specifically to do it! But, of course, you can handle AT Commands & responses with ADL… If your specific Service Provider uses SMS, you can, of course, use the ADL SMS Service to do the same th…

[johansimpson]

Thank you guys!! :mrgreen:

This works well, i am getting there one step at a time…

Regards,

Johan Simpson