Migrating from HL8548 to HL7650/7688/7800

[DKV]

Turns out this was the issue:

USB not detecting HL7688 after firmware update

Hello Klin2, I was not able to update the software as the model is different. I am working on HL7688 not HL75xx. I have attached the screenshot of the error message for your information. Is there a fix for the HL7688 version which I could test to see if the problem is fixed? [fw_download_error] I would like to ask you, is there a workaround with the existing build A2.15.1 which we could perform to fix the problem? Thanks Harish K

WIth A2.15.1, to workaround this issue, please make sure not pull low for GPIO_1 and GPIO_5 during boot up.

We were pulling GPIO5 low by default - all good now.
Cheers,
Dave