First off all, hello Everyone I’m using example ftp2ftp and i get next traces: at+wopen=1 OK [GPRS]: initialized. [GSM]: initialized. [UART1]: initialized. [UART2]: initialized. []: initialized. +WIND: 3 +WIND: 1 +WIND: 4 +WIND: 7 [GPRS]: open: -> DISCONNECTED [GPRS]: start: -> CONNECTING [GPRS]: GPRS EVENT SETUP OK (cid=1): GPRS activate [GPRS]: GPRS EVENT: 27 (cid=1) [GPRS]: GPRS EVENT ACTIVATE OK (cid=1): FCM open [GPRS]: FCM subscribe: 0 [GPRS]: FCM EVENT FLOW OPENNED: -> CONNECTED Opening FTP connections... ERRLOG ftp.c:424: returned WIP_CERR_NOT_SUPPORTED ERRLOG ftp.c:140: Options error Can't open src FTP connection OK modem is Q24 plus How can I fix this? Strange when i Use WipSoft plugin I’m able to conect on the same ftp server with at+wipcreate=2,1,"IP",port FileZilla also connects ok. Thanks in advance

[image] Send data to database in server with wip at commads Open AT Hmmm - so HTTP fails (“not allowed”), but TCP works. Could this be another case where your modem doesn’t have the necessary “Commercial Features” enabled? See: https://forum.sierrawireless.com/t/smtp-internet-protocol-feature-not-activated/3845/9 And: https://forum.sierrawireless.com/t/faq-forum-wiki/3491/15 You should talk to your Distributor about this!

If this is problem of that kind, why am i able to get ftp connectoin from wipsoft plugin, and btw i do not have distributor in my country

Help please, I’m desperate When I use cx = wip_FTPCreateOpts( SERVER, evh_cx, NULL, WIP_COPT_USER, DST_USER, WIP_COPT_PASSWORD, DST_PASSWORD, WIP_COPT_PORT, 121, WIP_COPT_PASSIVE, DST_ISPASSIVE, WIP_COPT_END); I get problem. When I try to connect to anonumus i manage that. So problem is with OPTS user, pass or port

Hiya, Is this a typo? Active FTP uses TCP port 21 for commands and TCP port 20 for data Passive FTP (which it looks like you are trying here) uses TCP port 21 to establish the link with the server, then some random port for the session. Have a look at : http://slacksite.com/other/ftp.html (among others). ciao, Dave

David, It’s not a typo, but shuldn’t WIP_COPT_PORT, 121, set the port for establishing connection to the port on whitch my server is listening. I’ll try to manage with teammates to server listen on 21 then I’ll post back to you what happened.

NOw, my teammates changed port to 21, and i can connect. But, this is only test server. Now Question is there a way to set port for ftp connection? How? Thanks

Please, if anyone knows how to set port with WIP_COPT_PORT please help. Or where to search? Thanks

Yes it was typo. :blush: .Should be WIP_COPT_PEER_PORT

FTP error ERRLOG

Legacy Open AT

awneil June 17, 2010, 12:30pm 2

Topic		Replies	Views
Using FTP with WipSoft Open AT	0	1755	July 2, 2007
Error in opening ftp channel Open AT	5	1222	August 22, 2008
Q2686 FTP download via WIP soft Open AT	0	811	August 14, 2008
Wipcreate problem Legacy AirPrime modules	4	4019	November 28, 2012
How to use AT+IPFTP= Open AT	2	3271	May 4, 2006

FTP error ERRLOG

Related topics