Need some help downloading firmware for my EM9293. I’ve tried power cycling the device and also running AT!BOOTHOLD but that didn’t make the firmware download successful. sudo ./bin/fw-download-toolrpi -f \~/Downloads/SWIX65C_02.17.08.00_ROGERS_030.033_001 -w SWIX65C_02.17.08.00.cwe -n SWIX65C_02.1…

Yes, you can use fdt tool: [image] EM9291 FW upgrade problem MC/EM Series Hi, I would like to know how to upgrade an image and multiple PRIs using FDT tool in Windows OS. Below is the command I used but it always shows error. Could anyone help with suggest…

The “GENERIC” firmware was already loaded in before. But for the ROGERS firmware, I used the fw-download tool while in normal mode but it got stuck as I’ve shown and automatically switched to LOW POWER MODE. So, I guess it was unable to download it properly and hence, the fw mismatch.

do you mean you can download GENERIC firmware but not for Rogers firmware for normal mode? Then how about firmware like AT&T or TMO or Verizon?

Well, I’ve also tried the newer GENERIC firmware downloads from the website and still ran into the same issue. So I don’t think it’s the carrier.

then probably you did not download any firmware successfully…

Yes, I think so too. Is there any way to fix this FW mismatch? I just want to go back to ONLINE mode at least. I’ve tried deleting the current FW images but still no luck.

@blackbow7 did you have an idea of any solution to the FW mismatch, or just how to download FW successfully in general?

i don’t see problem to download firmware: [image] EM9293 firmware upgrade failed MC/EM Series is your module in MBIM mode? Just did a test in Ubuntu PC, no problem is found for my EM9291 module: owner@ubuntu:~/QMI/MBPL/MBPL_SDK_R44_ENG5-fwdwl.bin/SampleApps/f…

You can fix the IMPREF mismatch with this AT command, AT!IMPREF=”GENERIC” Then power off and on the module. That should bring the module back to normal.

[image] blackbow7: AT!IMPREF=”GENERIC” This is returning an error for me: AT!IMPREF=”GENERIC” ERROR AT!IMPREF="GENERIC_030.054_001" …

I see. I checked into this error. Not due to the “password” command required. Try this command instead, AT!IMPREF=”ROGERS” Then power off, on. That should set you back to Rogers and in normal mode. Then check this command for me, AT!IMAGE? This will tell us what FW images are loaded into memory…

Firmware not downloading on EM9293

IoT Modules

jyijyi September 29, 2025, 4:13pm 19

i don’t see problem to download firmware:

Topic		Replies	Views
EM9293 firmware upgrade problem	5	140	July 8, 2025
EM9291 Registration Issues MC/EM Series	19	349	June 16, 2025
Error when downloading FW for EM9190 MC/EM Series fw-upgrade	14	1075	March 21, 2023
Firmware upgrade for EM9293 fails on linux MC/EM Series debug , fw-upgrade , driver	6	200	February 25, 2025
EM9293 firmware upgrade failed MC/EM Series fw-upgrade	7	170	September 30, 2025

Firmware not downloading on EM9293

Related topics