Hi, Will the RMNET interface work with EM 9190 module? Because the USBCOMP=? commands show RMNET Not Supported. Please confirm. AT+GMR SWIX55C_03.10.07.00 e32f05 jenkins 2022/12/14 16:18:06 OK AT!USBCOMP=? !USBCOMP: AT!USBCOMP=,, - configuration index to which the composition applies, …

No, rmnet is not quite recommended for users User should use MBIM interface

Ok, then does the EM 9190 module supports MBIM interface with Linux Kernel version 5.15?

Seems yes according to this user [image] EM9191 MBPL install error IoT Modules no . It did not enumerate /dev/ttyUSB port when I connect EM9191 to one of the USB port.

Yes it is MBIM only, you must use package “libmbim-utils” You can start the mbim connection by following these commands: sudo apt-get install libmbim-utils sudo touch /etc/mbim-network.conf sudo vim /etc/mbim-network.conf APN=internet APN_USER= APN_PASS= APN_AUTH= PROXY=yes Your APN will m…

EM9190: RMNET interface

IoT Modules MC/EM Series

jyijyi September 21, 2023, 11:13am 4

Seems yes according to this user

Topic		Replies	Views
Rmnet on EM9191 MC/EM Series	8	2388	March 4, 2022
EM9190: Data Connection without MBIM MC/EM Series	15	1028	November 24, 2023
EM9293 RMNET driver not getting installed Development tools driver	10	229	April 29, 2025
EM8695 stuck in RmNet configuration IoT Modules debug	12	78	July 22, 2026
EM9190 usbcomp settings IoT Modules	7	3333	March 10, 2021

EM9190: RMNET interface

Related topics