EM7455 stuck with PDP type 'ipv4-or-ipv6'


qmicli -p -d /dev/cdc-wdm0 --wds-get-default-settings=3gpp
Default settings retrieved:
APN: ‘r.ispsn’
PDP type: ‘ipv4-or-ipv6’
Auth: ‘none’

qmicli --device=/dev/cdc-wdm0 --device-open-proxy --wds-start-network=“ip-type=4,apn=internet” --client-no-rel
error: couldn’t start network: QMI protocol error (14): ‘CallFailed’
call end reason (3): generic-no-service
verbose call end reason (3,2001): [cm] no-service
[/dev/cdc-wdm0] Client ID not released:
Service: ‘wds’
CID: ‘43’

What is at! gstatus?

I figured this was due to Firmware on the modem thanks