Q2698 at command in direct ip mode

Hi,

I tried to start the direct ip mode with at!scact=1,1 but the device returns ERROR all the time.
Is there another command available to start the direct ip session? I searched the AT Command guides but could not find a proper solution.

Thanks

Sebastian

Hi,

Can you try setting up the Direct IP connection using different PID.

for eg: AT!SCACT=1,2

Thanks

Hi,

it knows !scact=1,2! and responds with
SWICALLPROG: 1,0,2,1,0,"*98#",129
!SWICALLPROG: 1,0,0,1,0,"*98#",129

Before I set the APN with
+CGDCONT: 1,“IP”,“internet.t-mobile”,0,0

But I can’t get an ipaddress at the wwan0 interface (udhcpc -i wwan0).
The device seems to be completely different from the Sierra Wireless MC series with direct IP.