Loading Extended Ephemeris on WP7702

[jyijyi]

no, i don’t think so, never heard such thing

WP7702 stuck in LPM

Hi , I have a WP7702 with mangoh yellow AT!PCINFO? State: Low Power Mode LPM voters - Temp:0, Volt:0, User:0, W_DISABLE:1, IMSWITCH:0, BIOS:0, LWM2M:0, OMADM:0, FOTA:0 LPM persistence - None OK AT!ENTERCND=“A710” OK AT!CUSTOM=“CFUNPERSISTEN”,01 OK reset at!reset OK AT!ENTERCND=“A710” AT!ENTERCND=“A710” OK AT+CFUN=1 AT+CFUN=1 +CME ERROR: operation not supported I stuck in LPM how can I leave the mode “W_DISABLE” ?

Bricked Unit by Running out of Space?

AT OK at!entercnd=“A710” OK at!bsinfo Product: FX30S(WP7702) Revision: 40 Main: MDM9206 (000) Radio: WTR2965 Power: PMD9607 (002) Flash: H27S4G8F2EKPB4 512MB x8 (173/0/0) (2048 blocks of 64 pages/block 4096B page size) OK OK AT!MAPUART? !MAPUART: 14,0 (Setup for 485 on the com port) It looks like the atIentercnd worked this time Tried to SSH to 192.168.2.2. → Connection Refused Anyway I can clear some space from the AT prompt? I have 2 or 3 apps I created, I can remove …

Octave recognized FX30S as FX30

After AT!RMAREST=3, ATI3 still showing FX30. [image] [image]