How to read message from a FTP server using AT commands?

[jyijyi]

Does this help?

FTP Download issues with HL7800

We are experiencing problems with downloading files from an FTP server. The idea is to download new firmware for our board. As a test, we are trying to download a 100KB file from the FTP server and we receive the first 512 byte chunk, but things just hang up after that. Here is the command sequence: AT+KFTPCFG=1,“ourftpserver.net”,“xxxxxxx”,“xxxxxxxx”,21 ← +KFTPCFG: 1 ← OK ← +KCNX_IND: 1,6 ← +KCNX_IND: 1,1,0 → AT+KFTPLS=1,“100KB.zip” ← +KFTPLS: 100KB.zip 102400 ← OK → AT+KF…

HL78xx FTP commands support

Hello Matt, thanks. It is Vodafone network NB1, region Greece but the apn is the same for all Europe. CREG is 0,5. AT+KCARRIERCFG=0. On the Sierra site it says the HL7802 is Vodafone compatible and there is no special carrier setting for Vodafone. The behavior is weird. We managed to accomplish ftp changing the procedure as below , AT&K3 OK AT+KSLEEP=2 OK AT+CMEE=1 OK AT+CGDCONT=1,“IP”,“ep.inetd.gdsp” OK AT+KPATTERN=“9” OK AT+KCNXCFG=1,“GPRS”,“ep.inetd.gdsp” OK AT+KCNXPROFILE=1 …